🚀 Scale Up Your Cleaning Game!
The 8MILELAKE Compact Air Needle Scaler is a powerful air-powered tool designed to remove weld slag, rust, paint, and dirt with precision. Featuring 12 hardened steel needles and a speed of 4000 BPM, it operates efficiently at 4 CFM and 90 PSI. Weighing only 3.32 pounds and made from durable carbon steel, this scaler is perfect for professionals seeking reliability and performance in a compact design.
| Manufacturer | freebirdtrading |
| Item Weight | 3.32 pounds |
| Product Dimensions | 4.13 x 2.17 x 1.38 inches |
| Country of Origin | China |
| Is Discontinued By Manufacturer | No |
| Material | Carbon steel |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
A**R
Good tool
Works better than I thought it was going to . Used it a lot and it still works.
T**D
worth the price
used it to descale a frame on a F350. Worked out great.
B**N
Great for the money
Does the job well and is a good value for the cost.
R**J
Great Value
I was hesitant at 1st because of the price however this thing works Great !I will post pictures at a later date .$AVED Me a ton of time cleaning/ prepping a chassis. 👍👍
W**L
it works
No issues out of the box. had one needle brake on me but i was working in a tight area and didn't notice one needle pop off to the side and deflect quite a bit. Totally my use lead to that. if i needed another one i'd get it but i'll be recommending this one to friends. Noise is what you expect out of this, loud. Doing its job makes noise though.
M**E
Works Like It Should, Maybe Better
I have only been using this needle scaler a couple of weeks, primarily to knock the flux off of welds. So far it has worked great. It usually does the job in 5-10 seconds, so I have not run it for a sustained period of time. I only have a small air compressor, but it provides enough air for chipping the scale of of a weld. If this needle scaler lasts, I will change my overall rating from 4 to 5 stars. I hope it does. MRC
G**E
Nice air scaler
I've only used it a couple of times but it seems to be of very good quality workmanship and works just fine. Not overly lengthy or heavy. I think it's a good value.One thing to be aware of, and no fault of the scaler. A 1/4" air connector came with it in the box. I wasn't sure which part to unscrew to install it, so the first thing I unscrewed was the large nut on the end of the scaler. The opening was too large for the 1/4" connector. Thinking it should have fit, so I looked a little closer. On the end of the large nut, is a thin, knurled disk. THAT is what you need to unscrew to install the 1/4" connector! It is threaded to match the 1/4" air connector. I screwed the 1/4" connector into the large nut, and then the large nut back into the scaler....success! The large nut goes in without leaking, but I had to use teflon tape on the 1/4" one to get a good NPT thread seal...pretty much standard for an air fitting.
A**H
Good value
Does the job , price was right
Trustpilot
3 weeks ago
1 month ago