QSA 4" Lift Spindles + Extended Brake Lines. Compatible with: 2004-2021 Nissan Titan (2WD ONLY) (Does NOT fit XD Models)

Gave me the stance I was looking for. I already had a 2.5” leveling kit on with Bilsteins on the middle setting so I now have about 6.5” lift on front. Put 3” blocks on the back and did the CB drop kit. Rides nice. Got an alignment the day after I installed these spindles, had major negative camber after install. They got it as close as they could. Will need to add adjustable uca’s to get it dialed in to 0. Install went smooth, you do have to swap and flip your tie rod ends. The hole configuration on the spindle only allows it to seat with ball joint on top (nut on bottom). The extended brake lines are a plus, a bit messy to change out, use something under to catch brake fluid that leaks out (I didn’t and now have some nice stains on driveway. Also very important to bleed brakes afterwards. I swapped bracket for the wheel bearing sensors from old spindles but had to modify to get to work. Used extensions to get upper ball joint stud nuts tightened. These spindles block access to the nut the way they are made. Also, the spindles come with 4 bolts, these are to replace the 2 lower wheel bearing nuts as the factory ones will be too short, you use the factory bolt for the top one. I will retorque everything in a couple weeks. Happy overall.

Easy install, prefect fit no problems at all after 6 months