KiwiGrip Non-Skid Coating

I purchased the 4 liter size pack to restore the deck of a 19 foot ProCraft bass boat. Converting from carpet to non skid deck material.I considered several options on this project. The sand sprinkled in between coats of gel coat method. The paint with added non slip particles pre mixed. This product seemed to have all of the features I was looking for. I read the reviews carefully , watched several videos on the product. I then purchased the 4 liter package of white Kiwi Grip.It comes as four bags with screw on lids in one liter size. This is ingenious in itself for a paint product. Minimizing waste and making it very easy to work with. The bags have a gusset and stand upright themselves.I must mention, this stuff is amazing to work with. Use a simple sponge brush to apply and spread an even coat. Use the roller to bring out the texture. Don't rush, this stuff is very forgiving. Made a mistake? Hit it with the roller again. The end result is the most beautiful DIY non skid deck paint I could ask for. The material itself seems very durable. I have just completed my fresh coats, and they look stunning to me. I recommend two coats for excellent coverage.Some good advice is to work in smaller sections and to not try and roll this stuff out too thin. Apply an even, decently thick layer with your foam brush in the entire section that you want to work. Come back with the roller to bring out the texture, then move on to the next small section and blend together with the roller. There is plenty of time to work with this product given the heat and humidity factors aren't against you. I used this in Florida in the springtime. I am very pleased with how it handled.On the fiberglass deck area, we sanded then pressure washed the surface. The deck lids are constructed of aluminum. I used a paint removal wheel on a grinder to remove old glue and paint to bare metal. Then coated with an acrylic based corrosion resistant primer to seal and promote a healthy bond.I will post a more in depth review regarding how the product wears. I still have a good bit of a one liter pouch left for touch up. hopefully this stuff lasts and cleans up well through some good years of use.

I bought the 4L package to do my deck and floor on my 23’ center console. I like the reusable packs it comes in, basically squirt it onto the surface and spread it out with a brush and then just use the roller to even it and texture it. I can’t say how long it lasts but it looks great.

Waited a couple of months to post this-FANTASTIC PRODUCT.....HIGHLY RECOMMEND.

If you are replacing the carpet in your fishing boat you might want to think about this product. I have a 16 foot Polar Craft with a half console that is twelve years old. I could not measure exactly so took a chance on the smallest container and got the grey color. The color may have a grey tint but looks white when dry. The small can did do the whole floor but I had to squeeze out the last drops to finish and I did not cover as thick as you should. I ended up getting a second can and by accident got black. I decided to use it anyway because the grey looks like primer on this boat. (tan) The black does look better and this time I put a better coat on the floor and textured it with the included roller the way you should. I do have a little left in the can this time so have some for touch up.This product does look like thick paint but has a nice non slip texture when dry. It does dry fairly fast even when you use it in sixty degree temperatures like I did. If you use it when it's hot you better go fast or you won't be able to texture it when dry. The jury is still out on how tough and durable it is. I am writing this to give you guys an idea on how much to get and how to use it. I did sand and seal the wood before I painted this on. I painted it on with an brush and then rolled the texture in. The roller does not take paint like a normal roller. Looks good and should wash down easily. We will see how it lasts. More to come. (I am not Salli. We share the Prime membership. Loren)

do yoiur prep work and you will have a pleasing finish. ordered grey color but is almost white. they say it can be tinted but i used as is.have only had on boat floor for one season, so i cant speak to durability. does clean well with Dawn dishsoap and boat brush.will require primer on aluminum

This product turned out good but it stated 200 square feet for the liter. I had 50 square feet and had to make it stretch to cover. I don't know how I could have done it without making it really thin, that's not what I wanted but I guess it's what I have. Also it will not hide any color variation so make sure you blend in any paint underneath. Otherwise it made a real nice texture.

We are on our second 4l can of this stuff and I hope it’s the last one we’ll need. We got lucky and got a wharehouse deal on the second can. We do love this stuff but wish it wasn’t as expensive but anyone who know anything about marine paint knows that this is probably a really reasonable price. It’s easy to apply, I like scooping it out with a brush, plopping it down and then working with it. If you follow the directions you won’t have a problem with it. if you mess up, or splatter anywhere you can wipe it up immediately with no issues. One thing I did notice about the the white color is more of a cream white. You are able to color the white if you’d like however we did notice the grey kiwigrip gets hotter than the white so that’s something to consider if you’re thinking about going with a dark color on your deck. We have little toes on our boat so we switched from the grey to the white just to avoid any discomfort for the kids.

KiwiGrip è famoso tra la maggioranza di velisti di tutto il mondo per la eccezionale sensazione di grip che da anche in condizioni di barca sbandata e magari con il ponte bagnato. Personalmente uso questo prodotto da anni e mi sono trovato sempre benissimo. Molto facile da usare, facile da pulire e da ritoccare e non ultimo assolutamente atossico essendo privo di solventi. Usatelo, vi farà contenti!

Queta vernice l'ho già usata in passato per "ringiovanire" l'antiscivolo preesistente. Si applica con una facilità estrema, basta sgrassare, lavare la superficie, lasciare asciugare e infine applicare con il suo rullo. Il grip può essere più omeno pronunciato a seconda della pressione che si esesercita con il rullo. Dopo tre anni è rimasta perfetta forse leggermente ingiallita. Questa l'ho presa per fare qualche ritocco dovuto soprattutto a oggetti pesanti che mi sono caduti accidentalmente creando qualche fossetta o graffi. Il prezzo può sembrare alto (e in effetti lo è) ma il risultato è eccezionale.

Prodotto noto e già testato. L’ho usato per il pavimento del pozzetto che aveva l’antisdrucciolo diamantato ormai finito. Facile applicazione. Spedizione nei tempi stabiliti.

Prodotto incredibile bucciato antisdrucciolevoli nn paragonabile ad altri

It's really easy to apply.Looks amazing. I'm very impressed :)It's worth every penny and dryers really nice.I love it and thank you for such a great product.