OVERCLOCK WITH CONFIDENCE ! UNLEASH THE POWER OF YOUR PI ! Overclock your Raspberry Pi with this Brand new Overclock Kit. Kit includes the following: 1 Raspberry PI Cyntech Blackberry Case. 1 High Quality Mini-Case Fan. 1 Aluminum Heatsink Kit (3 pcs.) Cyntech Black Case: Features: Knock out covers make this case compatible with the Raspberry Pi Model A board and Model B Available in a range of colours including Black, Blue, Clear and Raspberry Rugged Two-Part Construction Secured with Four Screws GPIO Ribbon Cable Slot Strong and Durable ABS Plastic Designed in the UK Base features two screw slots to allow the enclosure to be vertically mounted Cover can be easily removed without the need to unplug any cables The cover features the Raspberry Pi logo and fully idented LED indicators LEDs brought to surface and separated by integral custom lightpipe Cammed edges and recessed openings to protect connectors External Dimensions (WxHxD): 70 x 27 x 100mm Brand New Aluminum Heatsink Kit for use with the Raspberry Pi - Reduces the risk of hardware failure because of overheating - If you are into overclocking your Pi, this is a must. - Will fit most case because of its low profile The kit includes will the following: 1 pc. Voltage regulator heatsink : 9mm(L) X 9mm(W) X 5mm(H) 1 pc. LAN9512 heatsink : 9mm(L) X 9mm(W) X 5mm(H) 1 pc. SoC Heatsink : 14mm(L) X 14mm(L) X 5.5mm(H) All heatsinks come with thermal tape attached at the bottom. Brand New Mini Fan Specs Product features include high airflow, high temperature resistance & long service life. Fan includes rubber vibration dampers. Connects to the GPIO of the Raspberry Pi board Measurements: 25x25x7 mm Bearing: Sleeve Rating Voltage (VDC): 5 Power Current (Amps): 0.2 Speed (RPM): 10000 +/- 10% Airflow (CFM): 2.3 Noise (dBA): 23 Weight (g): 6
J**C
Fantastic device
Pros: comes with the three adorable heat syncs with the adhesive on the bottomCase is snug and is held together with four long screwshas a nice thin small slot for the GPIO on the sideHas little tabs blocking the Ethernet and one Usb port in case you don't use them.Instructions for plugging the fan into GPIO are very straight forward and where to put it if you want it higher or lower.Idle temp dropped from 37C to 27C (type /opt/vc/bin/vcgencmd measure_temp to see your current temp)BEST PART: This is not on the Description! Has two holes on the bottom for hanging! I plan on utilizing them.Cons: the tabs blocking the ports have to be broken off so if you decide you want to use the usb/ethernet port you cant go back. Perhaps it should have those little plastic "plugs" some things come with to plug ports up.needs a little something to figure out which way the sd card goes in on the outside.Honestly I'm splitting hairs here. This thing is fantastic.As a final heads up the screws feel a little snug like they don't fit. They're fine and hold it firmly.
A**J
I like the case
I like the case. The fan is a little on the loud side, even on the 3.3v (LOW) setting. just one away from amazing!
Trustpilot
3 weeks ago
1 day ago
