OTC Tools 6706 Injector Rail Assembly Remover for 2007-14 GM Gasoline Direct Injection Engines Used in Select Cadillac, Chevrolet, Pontiac, and Saturn Vehicles

Not much I could say about this one. I didn’t do a lot of working with it.

Worked great.

I bought this in mid May and it doesn't really work and a one of the bolts broke.

Works as designed

Grabbed this tool as we're seeing more of these GDI injectors leaking and thought the tool would help for the injectors which are in good and tight. What we found is the side which was not stuck it worked fine, but then again so does two pry bars. The side with the middle injector which was stuck in the head, the tool kept coming apart at the e-clip. When this happens you have to stop, put the tool back together and start again. After 4 attempts we added pry bars back in and finally got the rail out. I don't think the tool aided us any better than using just pry bars. The "T" handle on top only allows mild pressure and you end up using pliers to turn them. If the injector rail comes out with the pressure you can apply to a "T" handle then you didn't need the tool. I would replace it with a nut head and use a small hand ratchet.....Not an electric or air gun.....

Used this to remove stuck injectors on a Silverado 2014 with 5.3 L engine. Worked well but it is a slow process. Start with the two center bolts. When the injectors start getting out, switch the pullers to the other bolts and rotate the pullers until done.