Whirlpool W10113902A 30" Gap Filler Kit

Worked great! We installed an older gas oven/range combo that this was made for. It was easy to install and filled the gap behind. We fought with this stove install because the new gas line came up from the floor and the stove wouldn't go against the wall. We had a good 3" Gap that looked awful. Plus there was nowhere to put salt and pepper shakers. Problem solved with this. Shipping was fast. The piece is not screwed to anything so you can easily remove it to access behind the stove. It is heavy though, triangular shaped of different sizes on each side to accommodate different sized gaps. The heaviness ensures that it stays in place without needing screws and it has rubber on the mounting brackets to keep it from moving or rattling. This would probably work with many models. It only screws to the counter and spans the length between my 2 countertops perfectly covering the gap at the back of the stove.... It didn't mount to the stove at all. So if you have a stove that isn't specifically for this piece it will most likely work. You decide the height of where to install. I had an old electric stove that had the controls on the back wall and switched to a gas slide in with controls on the front.

I returned this item. This is intended to fill large gaps of perhaps 1.5” to 2.5” in three increments. The gap I had to fill was only about 0.25”. It looks like it would work fine where intended. It is very well constructed and finished nicely.

Basically needed to come up with my own install method, but it fits, so that's good. Expensive for what you are actually getting.

I purchased this gap filler kit a few weeks ago, because when we remodeled our home, we hadn't anticipated purchasing a slide in range and there was a noticeable gap between the wall and the range. Our house is an older home and it was hard to get everything in the position to not look lopsided, as it's out of square. I bought this because I thought that at LEAST one of the 3 varying in size sides would work. But alas, my gap was larger than I anticipated. Overall, it was easy to install and a great product. I initially thought the piece would be plastic, but it was in fact metal. If you need something for the gap, purchase this only if it is 3" and possibly a little less.

I read the specifications carefully and took measurements. It looked like it would work easily. Unfortunately. Unfortunately it simply did not fit the space accurately. I had to return it.. It's quite expensive for what it is. I'm glad it was easy to return.

Worked perfect. Easy to install and made for a very custom look.

I used this in a GE profile. It fit perfectly. It was a 10 minute job to install. Perfect solution for the problem.

This product is not slide in and the directions leave a lot to be desired. Four screws in my cabinet walls and a bunch of swearing later and I finally got it installed. It arrives three sided and each side is a different dimension and angle. They tried to make a one size fits all and it really doesn't work well at all. Really nasty to install.

Works as advertised, we are satisfied.