WAC Lighting EN-24100-RB2-T 120V Input 24V Output 100W Remote Enclosed Electronic Transformer for InvisiLED Tape Light, Black

Perfect fit for my client LED strip lights. Best part is that it works with Leviton dimmer.

This worked great. Has mounting holes pre-drilled, makes a neat workman like install. Very compact, on top of the upper cabinets for lights you don't even know it is there.

Works for under counter LEDs but flickers at firstt

An excellent product and very easy to install. Lots of lighting is possible with just one 90 watt transformer. Multiple runs in different directions are possible with the WAC "splitters". I used a Y splitter to go in two directions. If you add additional strips of lights make sure you get the same color temperature as you started with. Don't forget to buy the end caps for the end of each run. My only gripe is that you need to buy multiple two inch strips if you have areas being four, six, eight or ten inch runs and that becomes costly.

I am a 58 yo female health care provider and certainly no electrician, and I was able to install this system very easily. I am handy though. This is Pro 2 system 3000. Hardwired the transformer into an existing (thankfully) outlet above my cabinets. This system has been going strong for two years. I did not put it on a dimmer switch as I need to see and don’t need mood lighting when I am at the counter.

I used four of these in wall cabinets to convert from 120VAC to 24VDC. They are small enough to blend in and the 6 ft cord is just right to make it to the LED tape. Having an on/off paddle switch wasn't necessary for my installation, but it speaks well to the brand and I am happy.

Works well. Easy replacement

I installed WAC InvisiLED Pro 2 2700k under cabinet strip lighting. The light color is perfect. The issue is this AC transformer. The Pro 2 works off either 24Vdc or 24Vac. This transformer steps down 120Vac to 24Vac. Seems perfect right? Wrong. LEDs turn on and off super quickly. With AC voltage you can see the 60Hz frequency so get a strobe effect when there is movement under these lights if you use this transformer. Using a dimmer makes it even worse. If you care about light quality save yourself some frustration and buy the WAC EN24100-277-RB2-T. It is large and more expensive but outputs 24Vdc. Despite the "277" in the part number it works fine with 120Vac. You need a low voltage 0-10V dimmer which is also more expensive, but worth it to avoid ruining what is otherwise a great lighting system.