Size Name:220V-100W  |  Colour Name:White Product size160*160mmVoltage: 220V-240v--50HzRated power: 100W     Stand-alone net weight: 600gInstructions:1. Place the sterilizer on a flat table.2. Open the lid and place the quartz sand into the inner tank; the amount of quartz sand should not be too much (cannot exceed 80% of the inner tank volume)3. Turn on the power: the red light is the power light, the green light is the heating light. When the heating temperature reaches the preset temperature, the green light is extinguished and the heating is stopped. When the temperature drops to about 15 degrees, the automatic reset will continue to heat, and the cycle will continue to work. Unplug the power when needed.4. After heating for 10 to 12 minutes, insert the tools to be disinfected (eg scissors, razor) vertically into the quartz sand.5. The tool is heated for about 20 to 30 seconds. Wear gloves to remove the tool.6. When the temperature of the sterilizer liner reaches 175°C--185°C, the heating indicator will automatically turn off and the sterilizer will stop heating; when the temperature of the liner decreases, the heating indicator will automatically light up and the sterilizer will automatically heat up.7. Disinfecting beads can be reused repeatedly. It is recommended to change them after 3 to 4 months or when they are dirty.8. This is a high temperature disinfection machine. Do not touch the sterilizer directly with your hands to avoid hurting your hands.
Trustpilot
2 weeks ago
4 days ago
