VHT SP999 Nite-Shades Lens Cover Tint Translucent Black Paint Can - 10 oz.

If you're aiming to give your vehicle a bold, custom appearance, the VHT SP999 Nite-Shades Lens Cover Tint is a must-have! 🖤This translucent black spray is designed specifically for tail lights, fog lights, and turn indicators. When applied, it gives your lenses a sleek blacked-out look that remains illuminated when the lights are on, maintaining visibility and safety. 🚗💡The application process is straightforward: clean the surface, apply light coats, and let it dry. It's recommended to use 2-3 coats for optimal results. Just remember, once applied, it can't be easily removed, so ensure you're satisfied with the look before committing. ⚠️For those seeking a unique, European-style aesthetic, this product delivers. It's perfect for DIY enthusiasts looking to personalize their ride without breaking the bank. 💰

Works awesome. Had some Bumper lights on a Jeep Gladiator. This allowed me to blend the color of the Lights into the Bumper color with the Light still being able to shine through.Advice. Clean Surface and move slowly. Light coats work best and let dry between coats until you get the right color.Sprays easily but would suggest that you clean the tip after each spray.Dries very quickly between coats and final coat is dry within 30 minutes. Once paint drys no finger prints will show up. Seems to be Scratch Resistant and holds up under car washes.

Bueno

took me two tries to get it right because I didn't read enough tutorials. I sprayed by rear and front headlight. 3 of them worked well without any prep outside of alcohol wipe, while the last one was very spotty. Didn't realize later that was because I had previously polished and clear coated it.Sanded everything down again with 600, 1000, then 3000 grit sand paper. Sprayed the tinting product. Sand it again with 3000 grit. Wipe again. Spray 2nd coat. Polish and clear coat.I can still see some orange peeling and unevenness, especially when the light is on. Definitely a more involved process than just spraying a few coats.

Used this red spray paint to bring my faded hummingbird feeders back to life after the dishwasher dulled them. The color is bright, dries fast, and looks fantastic—like new again! I’ve added before and after photos to show the difference. The hummingbirds approve!

excellent

Works great. light coats make all the difference. Always check at night to ensure you didn't over do it.

I purchased the VHT NiteShades for the purpose of tinting my brand new clear motorcycle windscreen. It's made of durable plastic of some sort, which I figured is the same as most tail light lenses, so VHT was my first choice. I have never used the VHT products before and only knew of them by brand name. I hung the plastic windshield in my friend's paint/spray booth and began spraying in considerably light coats as instructed by the can's directions since I did not know how dark I wanted the end result to be. I waited about 15-20 minutes between coats and began running into problems by the second coat. There were small circle areas which the spray would not stick to which I thought I would be avoiding by spraying in such light coats. The spray would not stick in some places and left clear bubbles of unpainted area. I attempted to apply a thicker set of coats after I let everything dry for 1 hour, but the small circle spots were not disappearing. I ended up spraying the rear side of the windshield in the areas where the spray would not stick in an effort to get a uniform color, but some areas on the rear of the windshield had the same problems. I managed to get it to a satisfactory point and stopped before I created any more problems. I would not recommend using this on motorcycle windshield because you’ll probably run into the same problem I did with the spray not sticking in some areas. It almost got ruined and I thought the Niteshade would be the perfect item for the task I needed to complete.