HiLetgo 3pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions

Thank You!!!

The media could not be loaded. Had a 5V 2.1 channel amp board that had a noticeable hum/hiss while charging the 3.7V lithium battery through the amp board. By adding this charger module between the amp and battery, it alleviated the noise. Great little product at a great price. Good connection options. Highly Recommended.

Very good

These are reasonably easy to work with and can charge a small battery at an acceptable rate, but I'm taking off one star because despite including a USB-C connector for input, they do not work with USB Power Delivery, meaning that most USB-C chargers will not power them. This is disappointing, given the prevalence of USB-PD.It should also be noted that these do not provide a 5V output (they are chargers only), but this doesn't affect my rating since they are not advertised as having that feature.

I've had limited success with these, they are charging my batteries, but everything keeps running hot and the batteries drain quickly, using LP653042 3.7V / 820mAh LIPO batteries. I feel like I may be using them with the wrong batteries. Going to continue to research.However, my biggest feedback is the odd placement of the holes on the PCB. They don't fit standard breadboard pins / PCB prototype boards without bending pins. Would love to see these upgraded with a PCB design that fits better on a breadboard.

recibido rapido y todo bien

Used these to upgrade old Nicad screwdriver to Lithium iob battery. Works great.

I really like the charger but the board size should be a little larger so the mounting holes could be bigger. Not even my 2mm standoffs fit thru the holes so I will make a custom slotted holder from wood or Plastic.I put together a battery charger with an INA219 board that monitors charge current and voltage and displays on a screen. I have a raspberrypi zero monitoring it and sends an alert when things are done or if things exceed set tolerances. I plan to add temperature sensing to it for unattended charging so I can do things elsewhere at home.The next step is to add a discharge circuit for a full battery charge and testing platform.Of the 3 devices in my order, one failed (no LED's on at ANY time) but the device seems to continue to charge. I am leery of the devices now. You can see the comparison in the photo, one behaves as expected with no battery attached, the blue LED is on and the RED LED flashes. The other appears to be dead but still charges a battery, actually it will OVERcharge if allowed to.Follow up: on the device that had the LED's fail I was able to charge a battery with it even tho the LEDs did not work. BUT, and this is a BIG BUT, the TP4056 was allowing the battery to overcharge, so not only had the LED's failed but the overvoltage/overcharge protection was also bad. I find this unsafe so am dropping my review from 4 starts to 1 star.Update #2: Another of these failed and was over-charging my battery, no LED' indications for any state of the battery. Only one of 3 seems to be working.