30 oz Pack of 3 Replacement Lids for Yti Tumblers - 3.7 Inch Diameter - Spill Proof Lids Silicon Sliding Covers, Fits Yti Tumblers, Hydro Flsk, Reusable No Leak Design, Splash Resistant 30 oz

This lid has a very snug fit to the 30oz Yeti tumbler. The top slides to open and also has a stopper that goes over the hole to prevent leaks. No leaking occurs when the top is closed. Comes as a three pack and it’s a great replacement for a lost or broken lid.

These lids are great! They fit perfectly and have a tight seal. Great purchase!

Good Morning World,I love my RTIC 30oz Tumbler, but the OG lids have an open mouth slot. I am a klutz. I can't wear white. Ok that last one has many reasons, but anyway, I tried the flip-top lids, but they have 3 problems. 1. The Flip-top lids are not anywhere near spill-proof. They are only spill-resistant. 2. The flip-tops are brittle and a simply short drop will break the clip on the flip-top. 3. The flip-tops never fold flat and bop your nose when you drink.So I found these lids from C&Berg. The lids have one key difference from all the others out there: The closure slides! Ah! No more pushing the flip-top against my nose. And the best part is that the closure gets "tighter" as you slide it closed. This simple, but smart, design feature ensures the lid is as close to 100% spill PROOF as you can get.Caveat on the prior statement: I noticed that after you close the lid and tilt the tumbler, there would sometimes (but rarely) be a very slow leak. To fix this, simply slide the closure back and forth a couple of times to get rid of any residual liquid surface adhesion off the silicone pad. No leaks.Ok. So a couple of things after a month of usage.First, there is really only one slight Achilles heel. The gaskets are a little soft and/or the ridges are too thin or pliant, or...something. After many usages, the lids come off easier and the gaskets seem like they could be just a tad thicker. I've already communicated this to their customer support. Again, they don't leak, the gaskets could just be "better". So instead, I replaced the C&Berg gaskets and replaced them with the OG RTIC gaskets and a the flip-top lids I had purchased previously. Now they are 100% perfect.My test for the gaskets was to pour the tumbler full of hot coffee and some creamer, close the lid tight and shake. A tight gasket will not spray liquid under pressure. The OG gaskets and the flip-top gaskets don't leak, but the C&Berg gaskets do. Again, it's a test that will not often be an issue in the real world. A stronger gasket would just make a great product perfect.Second, the sliding part is a piece of hollow plastic with some silicone pads. At first glance, it might appear hard to clean as the slide doesn't appear to come off. Liquid and condensation gets into that area and some residue, pushed around by the silicon pad, also gets underneath. While you can put it under running water and water can get into (and drain out from) the hollow area, I was worried about long-term usage and the possibility of mold or other growth in that area. BUT it is easy to clean. The easy? Use a towel (so your finger does slide) and press on the side of the sliding closure and pull slightly away from the lid and voilà! It comes off completely so it's easy to clean. Another way to get it off? Push firmly on the bottom of the lid against the silicone pad. See the latter procedure in this quick YouTube video: https://www.youtube.com/watch?v=4jWyx_OVuk8Third, not a concern for me but it could be for others is that the silicone on the slider is easily stained by coffee. The stains have no effect on the cleanliness of the lid. If you still are concerned, soak the lids in 3% hydrogen peroxide mixture made by diluting 2 1/2 tablespoons of bleach in 2 cups of water. Either will bring the silicone pads back to their original white.I heartily recommend this lid as a replacement for any 20-30oz RTIC or Yeti or similar Tumbler (even the generic ones at BB&B largely use the same lids).The price is good and it took me many failed purchases to find this product. Don't make the same mistake I did. Buy THIS one. You won't be sorry!

Time for biannual replacement of lids on my 2016 workhorse of a stainless steel tumbler -The BEAST made by GREENS STEEL. The mug users in our home prefer the lids with the sliding cover feature rather than the flip type lid as we are too easily frustrated by the distraction of our nose and/or eyeglasses doing constant battle with the flip cover.Now, as fate would have it, whenever the need arises for lid replacement, I am always disheartened to find that the previous vendor/supplier is either no longer in business or no longer stocks the model I previously purchased. Grrrrr. Time to tediously scour the internet, hone in on what I hope/pray will fit my cup dimensions and personal preferences - then bravely bite the bullet by hitting the BUY button.Happily, this time my efforts were not for naught. While the mouth opening of these lids could be a bit larger on these lids, I can at least proclaim success in that they fit the 12 5/8" exterior circumference of my old faithful 2016 BEAST TUMBLER. Although my husband admits disdain for the smaller drink opening/limited flow of these lids, he has thus far found pleasant remedy by using a disposable straw. Being the utilitarian house manager that I am, my main focus is maintaining the overall function of these cups and keeping the bugger clean, which fortunately for me has seldom been an issue. Pretty simple. Just disassemble everything (hand clean any stained areas) and place each component onto the top shelf of dishwasher (cup, gasket, sliding cover, the lid itself - along with the big, comfy handle). Everything comes out clean, dry, and spotless!Now, I've read product reviews from many who complain of inability to ADEQUATELY CLEAN the space underneath the cover that slides over the mouth opening. Well, since 2016 I've used the same process which is to "pop" off the sliding cover, clean off any stains (or heaven forbid - mold) within the nooks/crannies and place in a secure spot in top level of dishwasher. Now, I won't lie... "popping off" that sliding cover can be a daunting task the first few times you make attempt. It is secured quite well and feels as though it will break - and in fact may produce some ominous cracking/noises of impending breakage during your first struggle to remove. Patience, persistence and and determination is the key, though. I use either my pinkie finger or the flat end of a BIC ballpoint pen to push into the soft center of the silicone pad with just enough force to pop the cover. (Fortunately, in 6 years I have broken nary a lid.) I discovered that the repeated process of removal makes each subsequent cleaning routine faster, easier and stress free. The ultimate reward? Spotless, sanitary cup lids!Even though I would prefer a larger opening to facilitate flow of drink, I think this four pack of lids are high quality and economical. I have had no problems with leakage thus far. If it ever should become an issue, I would first try replacing the old gasket with a new one rather than buying an entire new lid. REMINDER: These lids WILL NOT FIT my NEW 2023 BEAST 30oz TUMBLER (the lids are too SMALL).

These are working well. The little push tab helps prevent spills but it sometimes comes off in the dishwasher. It goes back on easy enough so not a big issue for me. They can be hard to get off of the mug but that’s way better than falling off easily. So I gave it a five on “comes off easily” even though it really doesn’t. Fantastic replacement lids for the price!

As long as your Yeti or whatever type cup you have is the 30 oz this lid will fit. I love this lid bc it has a slide closure on the lid so if your outside you can slide it closed to avoid bugs or dirt, whatever plus it keeps ice colder as well.Lids fit great. Seals last as well.Value is great

It fits well and is easy to clean, the rubber seal does not stay in place when putting the lid on and it leaks, you have to be careful to double check and make sure it's in the correct position or your get wet while drinking. Note 1-23-24 following this review the seller contacted me and sent replacement lids! Thank you!

I got these lids to replace the ones that came with the cups, and they worked out great. I would definitely buy them again and recommend them for anyone who needs new lids for their metal cups. When the time comes that I need more I will buy these again, thank you.

Tapas perfectas para el Yeti. Recomendable totalmente.