CANIS SPORT INC Speed Holster, IPSC Gun Holster Universal CR Speed Holster for Viking, 1911, CZ, Beretta, Tangfolio, Grand Power k100 for Outdoor Sport, Competition(Black)

Works great. But... you need to make it work. If you have flashlight mounted, forget it. Get the right holster. If you have a Rail mounted, forget it. Get the right holster. If you can't get this to fit your gun, get a different holster. If you can't use tools, move along to Plan B.I run a CK Arms Open Gun in USPSA, using the Cheely SS E2 grip. It's solid and tight. I usually cut off the little knob for the lock, usually gets in the way. The removable trigger guard shims need to fit your grip tightly, just enough where you take out all the slop. Mines does not rock side to side. Take the shims and make them fit. Get a feeler gauge and check the gap. Then use the larger shims and sand the shims to fit your trigger guard. I started with 80 grit then finished with 320 and 400. Get the gun to fit so there is no side to side, up and down or forward and backward movement. If you are reading this and have no clue how to do this, don't. Walk away and get a Double Alpha Holster. You can't work with tools, this ain't for you.I use this Holster because of the Comp round pin and the easy to use lock. When finished and show clear, I like the idea of dropping the nose of the gun onto the pin and rocking it back into the holster and lock it up.Also on the edge where the trigger guard enters the holster, put a bevel on the top edge. I have mine set tight, I can still draw no problem, but over time it will loosen up and after a few years, I'll get another. 39 bucks isn't much.The white plastic screw that is used to adjust for the frame to sit on, adjust this last. Look at the gap between this screw and the frame in the light. When you get the trigger guard and round pin to fit, then adjust this white screw, just to touch the frame.The round pin on the end, attached to the sliding holder, I used the .365 pin and sanded that to fit my Comp. The pin holder comes with 1 screw, I drilled an extra hole and use 2 screws. Make sure there is no gap between the end of the gun and this round pin. Pull and push the gun forward to check to tightness. Even check the round end of the holster where it touches the grip behind the trigger. You need to look over the relation of the holster verses the gun. It takes time, but it is well worth it. Gun is totally solid, no movement. Locks up great. Spend time ad think about how to get the gun to fit this holster. I might buy another now, just so I can have another in the future.When you get everything to fit and smoothly sanded down to 400 grit, oil the round pin, shims, and the lock.

GOT USED PRODUCT WITH MISSING INSTRUCTIONS AND MISSING PIECES

Try to avoid this item guys. I gave 3 stars because this is not expensive, but first impression is : This won't last 1 month of use.This doesn't hold gun wellSafeti position is by design in wrong wayScratch trigger guard (after first test gun trigger guard is damaged, there is scratch, i'we cut plastic excess but this is too late now)Provided screw doesn't match all adjustment plastic, this is too long after removing extra spacers (this is as well reason for scratch)I am not sure did I got used or new item, screw have destroyed plastic piece as this is received and can't fit in hole anymore. If this is new then material is very bad.As Short resume : don't waste money if you are planing to use it. If this is just as experiment and beginner test may be ok but you will be sorry if you are trying it with new and good looking gun. May be good for airgun.

Awesome deal works just as well as you could ever hope for. And I’ve adjusted it to fit multiple guns with no problem, glocks, 2011s, and tangfolios all fit great

I modified mine to fit a polymer 80. Sturdy but definitely not a refined holster. Worth the money to play around to get it to work. Also did not get instructions, though the pictures above for the product are good enough. I did not get two pairs of trigger guard locks, only got the mid length short lock, and the long length tall lock. Missing the mid length tall lock, and long length short lock.Missing parts drops one star.

Can not adjust the barrel plug high enough to accept a pistol with a rail. Tried it with a full frame 1911 with rail, and a Sig P320 X5 Legion.

Used it in Open class USPSA

The product that was sent isn’t new it actually had sand in it! The holster worked with my Sig Legion and that’s the only reason I kept it