FIAWF922-18 Custom Fit Winter Front/Bug Screen , Black

The winter cover fit nice and lets my truck warm up quicker. I think the bug screen should be an option if the customer wants it. It is of no value to me. I used the winter cover to postion the stick on studs. I taped the cover in place before peeling the wax paper from the foam tape. I will use the screw on studs for next winter. I did not want to crack the grille by trying to drill into it when it was cold.

i like it, keeps water temp on engine at operating temp when cold as f$&@. might be coincidence but i do have a leak on my radiator now, idk tho dam the luck haha. oh well keep on trucking i guess it won’t keep me from putting it on when it’s cold as $?&@. thanks. fit great, use the screws or it will fall of when you take it off. can’t leave it on all the time. on in the am, off in the afternoon, on in the evening. the stick on ones will fall off. good luck peeps. my truck is a 6.7 powerstroke fyi.

Bought this for a 2011 F250 because I live in a place that gets down to -55. Easy to install but follow the instructions. Only part I had an issue with was installing the buttons. Instructions tell you to loosely install using the screen. I made the bad decision to make sure the screen looked tight when installed but when I went to install the winter front it would not go on. Had to adjust 2 buttons but was not to hard. I've had this installed for a couple months now and no signs of wear and buttons are still holding strong. Over all, great quality, looks great and follow instructions.

Works great so far on my 2012 F-250 with the 6.7 Powerstroke Diesel. I do notice that the engine oil temp runs about 10 degrees warmer cruising when fully up to temp then without it when I would finally get up to temp. Warm up times, and the ability to hold heat are better as well. Not quite night and day but it does help to keep some more heat in the cab when it is only 5 degrees outside. I'm sure someone who lives in a climate that it is normally below zero most of the winter would really find a benefit. Only complaint is the black stick on snaps. I will probably peel them off in the spring when it gets warmer and buy another set from Amazon.

Don't waste your time with the glue on studs. Just use the screw on crome ones. Fits perfectly on the truck. Noticeable difference in engine warm up time.

I purchased this for my 2008 F 250 Superduty pickup truck and found it will not fit. The lengthwise measurement of the cover is too short and the rivet mounts will not correctly fit on the grill of my vehicle. The quality of the bug screen and the winter cover appeared to be fine and I would have been satisfied with the product (if it fitted). The company is skimping on the packaging of the item, as it was shipped without a protective outer box, just the original thin cardboard box which it would have been displayed in, in the store. I was surprised that it arrived in one piece, it was pretty battered up.

Super easy to install and fitment is spot on, highly recommend

Use snap clips and you’re Golden, yes this fits 2011-2016 superdutys

I bought this as soon as I saw the price for it. It was a return to Amazon because of “slight damage to the top and bottom”. No concern to me, I’m putting it on my old truck. When I got the package I finally got to see the slight damage….. it was in mint condition, no damage anywhere, no parts / pieces missing. Score !!!

I wanted to screw the buttons to my grill because I plan on using this year after year, the instruction were kinda of vague I wish they would have sent a template for lining up screws/buttons, because it was super hard getting it all lined up and making marks to pre drill into my grill. I got the top all lined up perfect but got a bit of a wrinkle along the bottom, the winter front seems to be fantastic quality, hope it last as long as the pickup. Wish it fit just a little better.

I installed on a 2012 f-350.I used the stick on tabs on the cover to set where I wanted to put it. Then I removed cover. Used the sticky tabs to align my drill and drill small holes for the screws. The sticky tabs aren’t the best. But at -40c not much sticks. So the screw option worked great. For the money. I’m happy with my purchase

The winter front works very well, disapointed with how the snaps on the mesh gaurd and the winter front do not line up. So unfortunatly I had to use the winter front as my template and the mesh bug gaurd woll not go on. I am going to try and reposition the snaps on the mesh gaurd to line up better with how the snaps are on my truck. Overall still happy with purchase the deep freezes here won't be as cruel to my diesel engine.

Great winter front but it would be great if a template came with it.