Noulei Shiny PLA 3D Printing Filament 1.75mm Silk SILVER for 3D Printer and 3D Pen, 1kg 1 Spool +/-0.02mm

I've tried five of the Noulei Silk colours now: Copper, Antique Gold, Rose Gold, Bronze and Black.This is the most reliable PLA material I've used, every print comes out perfectly. Sticks to the print bed with no issues and no need for glue etc, no warping or problems with layer adhesion, and removes easily when finished. Using a QIDI X-Plus, heated print bed, enclosed print area. Printing at 190C, print bed 50C with first layer 60C.Currently working on an item with 56 parts overall, 9 distinct pieces with multiples of each, and each copy comes out identical.The appearance is excellent, very shiny and eye-catching. The Copper in particular is outstanding, looks exactly like real metal. The Black also looks very like anodized aluminium.The Bronze is a little too green to really be called 'bronze', but that's true of every Bronze material I've seen. It looks exactly like the picture, so if that's the colour you want that's the colour you'll get. It fitted my project perfectly, so I'm very happy with it.Likewise the Rose Gold is a little too dark brown to really be called 'rose gold', but was the colour I was after and came out exactly as the picture, so again very happy with it.The Antique Gold is quite similar in colour to the Rose Gold, but less brown, and looks very like old and slightly tarnished gold. It's also a good 'brass' colour.I already have several spools of other brands 'Silver', otherwise I'd definitely buy the Noulei one now. As it is, I'll be buying it when I've used up what I have.Likewise I currently have no requirements for the other colours, but any that come up I'll definitely be buying Noulei. I'm very surprised they have so few reviews, given the quality of the materials.

This filament worked beautifully and with minimal stringing on my CR 6-SE. The purple I got was easy on the eyes and made a lovely print every time. I will be buying again. Note, that I used a hot end of 205 C with the printer bed at 60 C.It adhered perfectly to the glass bed and when it cooled, it was free from the bed. No scraping needed.

deliverd within 24hrs, 100% condition including packaging. prints very well in temperatures range 200 - 230, best overhang at 200 degrees. any print looks fantastic. i would recommend this brand.

I use quite a lot of PLA.I've used a few different colours from Noulei but this silk red has proved a little more challenging.Firstly print quality if your printer is properly set and printing at the right temperatures is great.I love the colour as it was a deeper red than I'm used to so it produced very impressive results.I struggled with bed adhesion but this may be not down to the PLA but my particular set up and temperatures.I also found printed item's had a harder more brittle finish so for parts this PLA is not going to wok for me.If you print models for display then this is a good colour PLA assuming you don't have bed adhesion issues.Still giving it 4/5 as I do like the finish.

Very disappointed with this filament. So much so I have binned the reel. Prints were very brittle and stringy. I broke several pieces when removing them from the bed. I tried with 3 other filaments and all managed the same piece without issue. Bad quality!

This is the first shiny PLA filament I’ve ever used and I’m glad to say it was as easy to use as other PLA filament I’ve used in the past.The shiny effect makes 3D printed parts look great, especially in this silver colour. If you want a easy to use and good looking silver filament give this a go.

I have used 12 rolls of this fillerment now without any problems so has become my go to fillerment. It works perfectly in all 3 of my fdm printers and its nice to have found a fillerment that I can rely on.I have so far tried antique gold, silver, black and copper. All of which look fantastic.I am surprised to hear that people have have some tangle problems? I have found each roll to be well wound and without issues.As someone who has 2 to 3 printers running day and night I would highly recommend this fillerment and it works better than any other fillerment I have tried.

This was the first silk filament I had bought. The print colour is really nice and can print with little or no stringing once set up. Well packaged and spooled. The problem I had with this was when doing figures where there is little strength between layers so appendages are fragile. If you are doing parts which do not have vulnerable appendages then it should be fine.

Bought the Black silk PLA. It's not a rich black, rather a very dark grey. Best I can describe would be "Pantone Black 7c". A more neutral hue than a previous Silk Black I tried from another vendor which more of a deep warm grey like Pantone Black 4c.The Noulei roll came very well packed in a tight, resealable bag in a cardboard box. There were small felt pads stuck to the bag to keep the box from rubbing rolls in the bag - first time I've seen that. Printing with it has the easiest I've ever had with Silk-PLA. All my other silk rolls will clog if the flow stops for a few seconds or even thought of using retractions. Some sort of additive sticks to the nozzle more than regular PLA. The Noulei black silk does not do that! It performs like regular PLA except at a slightly elevated temperature. I'm running 220 with my stainless steel nozzle. Going lower effects the sheen.Only complaint is the inside end of the filiment luts into the spindle's center opening. My setup has spools hanging on pegs so the whole roll lurches once with every revolution.Also bought a roll of Silk Copper. Haven't tried it but expecting good things.

Geweldig van kleur, een genot om te printen.

Prisvärt, blir lite metallkänsla i utskrifterna, lätt att skriva ut med

Absolutely beautiful filament, sticks to a properly leveled, stock bed of Ender 3 pro with no problems.Prints very well at .1 and .2.Very nice shine and very smooth to the touch.Filament before printing is brittle and will break off.Does not like to be squished when printing and will hang up, if hotend is too close to the hotbed.Cannot tell how much is left on reel, as it is solid black.This stuff is Golden!!

The media could not be loaded.  Au départ j'étais très méfiant, le sachet avait l'air ouvert à la réception, le vert beaucoup plus clair. J'ai contacté le vendeur puis finalement c'est un excellent filament, désolé d'avoir douté.La couleur est parfaite, les reflets sympas, il accroche bien au bed (un peu trop 😁) et s'imprime très facilement. J'ai obtenu de bons résultats à 215⁰C sur ender 3 v2 et buse 2 microns. Sur la photo le couvercle est en 2 microns (20% remplissage) et le corps de la boite en 4 (60% de remplissage), le résultat est très correct.