How to use the tool Step1: Set the car in TPMS learning mode Set the gearshift lever to "P" Put the ignition switch to “ON” Enter the interface of tire pressure display by DIC DIC shows "Press Set / Ctrl to re-learn" Press “Set / Ctrl” The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode Step2: Read tire pressure sensor information Start from the front-left wheel Make the antenna on the tool up against the valve core position & close to the rim of the tire sidewall the tool starts by the start switch Successful to read the tire pressure sensor information when the horn bleeps once Start at Driver Front, hold unit next to Valve. Press Button, Horn will blow. Step3: Read other tire pressure information with same method Follow the instructions above to read tire pressure of the front-right, rear-right, rear-left wheels. The turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete. Warm Tips: 1.Please make sure using good condition 9V battery. 2.Please make sure antenna in correct position when using the tpms tool. 3.Don’t for heavy truck, make sure your car is in the list. 4.Before TPM system works normally properly, the body control module will record ID information of each position in the tire pressure sensor. 5.It won’t work if you purchased aftermarket sensors with wrong frequency.
T**L
No instructions it does work though.
Luckily there are great videos out there to assist in using this to reset your tire pressure sensors on a 2016/2017 SS Camaro like the one I own. Some video show placing the tool on the rim nearest the valve stem after starting the car, setting car to learning mode, then pressing the white button until the cars horn honks. When this process is used correctly you will need to turn off your head lights (evening when dark is best time) once you place the car into learning mode using the steering wheel buttons the cars horn will honk. Then the turn signal lamp on the corner that is to be reset first lights up. When you place the tool near the valve stem on the rim or where the tire meets the rim near valve stem, holding down the white button, the car will honk it's horn letting you know to move to the next turn signal area lit up. My car went driver front tire, then passenger front tire, rear passenger tire and lastly driver rear tire.
G**T
works, save me much money!
This tool works great for my 2016 Buick, save me a lot of money. I couldn't know use it first, but read the product description carefully and saw the pictures , it is very easy, putting the antenna at the correct position is very important.
W**Y
Works on my 2011 GMC sierra
Pretty simple to use. It worked like a charm on my GMC Sierra
D**N
Works as designed
I try to do a lot of my own work and when you rotate tires you can buy a tool or drive to a dealer and have them redo the sensors,
R**N
Pretty good
I really do like this product for my line of work I have to say after two weeks of owning this I need a new one because I ran it over with a truck anyway works as advertised
J**Y
Easy peazy
Perfect
D**P
This tool is amazing
I love this tool I use it daily at work and it always functions how it should
G**E
Relearn tool
Reset tire pressure reading on pickup after rotating tires. Worked great.
Trustpilot
3 days ago
5 days ago
