Superwinch1140230 LT4000SR Winch 4000lb(1814kg) Single Line Pull with Roller Fairlead 3/16" x 50' Synthetic Rope Corded Handheld Remote

I have bought many of these LT series winches over many years and every one of them still work. Many of them went on customers machines that are constantly being abused on there farm. I still have my first one that has sat outside for about 10 years now year around never been covered that still works. These by far out live any other name brand winch. Super winches Customer service was so great in answering my questions that was more technical then anyone ever really ask. One important question i had asked was about there ratings. These LT series winches are rated to lift there rated lbs on the first wrap where there lower series do not and most other brands will not lift there rating either. Most winch ratings are based on a rolling weight up a slope not lifting and most other brands will not answer the details of how they got the rating like Super winch did. The only down sides i see is the switches are not any better then most other brands and the circuit breaker that comes with it has everything exposed. It is nice they at least send a circuit breaker with the winch where most other brands don't but to use it i have had to become creative in either covering it or mounting it in a location nothing touches. A little Tip for ya if you use the circuit breaker put it on the ground side so at least if the exposed part touches ground it don't short anything. It normally comes packaged with a red wire attached i just unbolt the red and use it on the ground side.With all of that said these will stay my first choice every time i need a winch or a customer asks for a winch.

Excellent winch. I used it the first day it was installed on my 15' AC Prowler 700 XT to pull a roof on a Clear Span building. Not a single problem, and the winch did not strain at all. Good installation instructions. It lined up perfectly with the mounting holes for the factory option Warn, for you Arctic Cat owners. Why you would spend 5x the cost of this for a different brand winch is beyond me. Awesome product!Update: 1/26/17: Have been stuck many times, buried to the frame, and this thing has pulled me out no problem every time, including up very steep creek banks. I also have a plow that I raise and lower with this, and so far so good, no problems.

I had to drill the mounting holes for this winch on my 2013 teryx 4 front bumper. The wiring diagram was easy to follow and it probably took me 3-4 hours to install and zip tie all the wires. It worked perfectly and looks great. I can't wait to use this in the many situations that arise. Great price and great product. Very glad I bought this. The motor is quite. The 12' long hand held remote is very nice. Also the handle bar control is very awesome and mounted nicely inside the teryx.

I purchased the 4000lb model with synthetic rope. It was “used” (open box but not previously installed) for $200. I decided on a super winch mainly because of the good reviews. I didn’t want to get a no-name brand and risk an issue when I actually needed it.This is mounted on a KFI winch mount and installed in a 2021 Yamaha Kodiak 700.I am currently doing the install now. There are a few things I don’t like so far.The biggest issue I have is with the circuit breaker. There is no insulation on the buss bars. This is a fire hazard. The directions state to wrap the entire thing in electrical tape, but that is a hack way of doing the install. It’s putting a bandaid on superwinch’s crappy design. There should be something to make sure it is isolated from short circuit. I was going to encapsulate the breaker assy in stycast 2651, but I decided to buy a resettable breaker that is in a sealed housing.The next issue I have is with the mounting bolts. The bolts that mount the winch to the mount are 30mm long. The depth of the hole in the winch is 21mm, the plate is 4mm thick. That leaves an excess of 5mm. The thickness of a lock washer and flat washer stacked is 3.78mm. That is still an excess of over 1mm (directions do not say to use both washers). If you go to tighten the bolts and don’t realize you’re bottomed on the inside of the winch housing, you risk cracking the metal base. Rather than stack washers, I will grind the threads and chase the threads with a die.The last thing I didn’t like is the clutch knob being plastic. That’s not really a big deal, but it’s just cheap.The relay is fairly large. The mounting bracket is too short to make the span on my winch plate. I had to make a mounting plate that could hold the relay and mount to my winch plate.Overall it is a decent kit. Probably on par with a harbor freight winch.I will update this review after the install is complete.

Easy to install once I got the separate mounting plates installed. Wiring was more than long enough and easy to hook up. I used it shortly after installing it and it worked as expected. The remote switch made it easy to use outside the vehicle.Better value than other brands and made in USA is always a plus.

It had the perfectly placed bolt-mount pattern as described and matched up with the mount I had to use. I had everything I needed but the installation instructions could have been clearer, especially toward the end when I needed to connect to the ignition wiring. Most of these UTVs as it turns out have at least 1 pre-installed female bullet connector (my RZR had 2) just for this purpose. Luckily I did a quick web search before I cut into the factory harness! I love the winch and everything works great.

I’ve worn out/broken three lines so far but the winch is still going strong.

Winch was exactly as described. Mounting was very straightforward. Installed on side by side so had to buy longer battery cables. Works well.

Super verricello che utilizzo sul carrello per un gommone di 6 metri. Perfetto e veloce e pagato la metà di tanti altri siti. Consigliato.

A small but powerful winch this product lived up to expectations. With the aid of extra pulleys mounted on our boat cradle we were able to pull about 3800 lbs of boat and cradle up a steep ramp on wooden rollers. Performed admirably and highly recommend!

Very well made---works perfectly.It is used on my boat lift and it does not hesitate at all. (a 20 ft. Doral inboard)

So far so good. Haven't really had to try it in the rhubarb yet but looks great on my side by side. That's why I only gave it a 4 star.