Ergotron – LX Monitor Arm, Single Monitor Desk Mount – fits Flat Curved Ultrawide Computer Monitors up to 34 Inches, 7 to 25 lbs, VESA 75x75mm or 100x100mm – Polished Aluminum

The Ergotron LX is one of the best monitor arms you can buy on the market.They are an industry brand that sell to businesses so they are reliable. Sure you can buy a way cheaper monitor arm, but this one will retain its tension, doesn’t make any noise while moving it, has great location control, and looks amazing.The installation is easy, and the amount of space it takes up is minimal.I’ve had mine for months now (this is a late review after trying it out for a long time) and I love it. It included everything necessary for installation.I am using it on a 24 inch and 27 inch monitor and it works flawlessly. It holds them well.I would say if you have the money then buy this for sure. Don’t buy a cheaper monitor arm if you can afford to buy this. It’s worth the money.

I got one of these for my Cintiq 22hd, and I don't know why anyone would want to use a Cintiq without an arm mount like this. I've never used the included stand that came with my cintiq, and nor would I care to. The ergotron does everything a person could about want, better, faster, and easier. I can recline in my chair and pull the Cintiq into my lap, tilt it back and lay a picture book on 1 half of the screen *to ref draw from it*, or rotate my screen to stand vertical giving me a humongous tall drawing area, or even lifting the stand to put my screen up high so I can stand while drawing if I am in the mood for such, or move the screen to face any-which way in my living room as I see fit.A good arm mount like this just isn't for Cintiqs, everyone should have one of these who doesn't have a huge screen display! I can easily pull the screen down right into my face for reading small text in high res, move it up and tilt it to face downwards at me while reclining back in extreme comfort while gaming or watching movies, and easily push it back when I need to get up. For drawing this thing is awesome. Being able to pull my screen right into my face is so handy for drawing as I look to study small details., but it's equally impressive for entertainment use. I at all times can have the screen exactly where I want and even positions I never even considered. Should people have this much power I wonder.? Are we ready as a society?The various sections of the arm are adjustable with the included tools, to make it as loose or as tight as you'd want. I did have to adjust the tension of each piece a little bit. Some were too tight, others too loose. Again this was easy to do, just follow the instructions and look at the diagrams carefully. I have seen no evidence of sagging or weakening, it's just as stiff as the day I got it, and even if it did start to loosen up, I can tighten the tension screws more. I have it tight enough that I don't move the screen while pushing the stylus pen on it, and yet loose enough that it takes very little muscle to put it into any position I want. Moving it or rotating to aid in drawing is so easy, easier then how it would work with the Cintiq's official included stand yet it also does so much more then it ever could.Wacom should partner up with these guys and include the Ergotron with all tablets light enough to work well with them. Speaking of which, I got a 22hd not only because it's cheaper then a 24hd, but also because I knew it would be a better fit for the ergotron and how I'd use it, in addition to being under the max weight limit. This ergotron arm is so strong, and I could easily tighten it up to support even more weight. It would not surprise me at all if it can work well with the 24hd if you took off its' monstrous 60 pound stand, but technically even then you will still be over the weight limit.The clamp base has holes in it, so you can also drill screws through it to make it more secure. I have not drilled any screws to reinforce it, nor would I want to. Like all pieces of this arm, the clamp is very heavy sturdy steal, and very tightly has been clamped into place. I tried to see if I could make it budge or make it slide around, and I can't. This is a much more solid stable clamp then the pictures show. The Cintiq and arm mount are not going to slip off and fall over unless my entire desk does. As stable as the ergotron is, there is a little shake as I press more firmly and work quickly with the stylus, but this isn't an issue imo, and a very small price to pay to have such a mobile screen.My only complaints after a month and a half of heavy use, is I do think the instructions could have been.... better. And having a hallow part in the upper arm section to hold the cables, but to me that really isn't a big deal at all. I haven't used other lcd arms, so I can't say if this is the best one the market or not, I just know that for my needs this thing is legendary.I knew I'd love this product, but I didn't know it would be so good that I wished I could rate it higher then a 5.

The mount is easy to build and install. Works for lots of different sizes. And hold a lot of weight.I mounted a 24” Huion drawing monitor on one and those are heavy! It worked perfectly and gave me the angles I needed for drawing or Using it as a monitor.Was so impressed I got a second and have a 49” curved LG ultrawide on a racing simulator and it allows me to get the monitor close and get that full surround feeling. Even fully extended it hold all that weight with no issue.

I've used a few cheap monitor arms in my life, and they are generally ok if you want to leave your monitor in one spot, but barely ok. This arm is expensive, but honestly for something you can keep using its worth the premium. I always thought a monitor arm is a monitor arm but this product changed my perception of that.This arm has very smooth motion, very easy to move it around and dial in the right setting you need for the situation. Once you got it positioned it is extremely sturdy and stays where you set it. You can continually adjust this thing with ease, no need to mess with tension screws or jank actions.It looks slick in matte black, which is a lot nicer than the plastic or shiny materials used in other mounts. Not really a big deal but its sometimes the small details.Installation was easier than any other arm i've installed. The parts are laid out properly and the way it goes together in parts is a lot more smooth than other designs. Its pretty much 3 lego pieces and you're done, the base is just a base so its not top heavy while you're trying to secure it to your desk. Monitor cant be nut locked in place so you have to remove the entire last segment to replace your screen, but that adds to the stability of the monitor as it doesn't shake at all.Having a screw to disable rotation is great for my OCD tendencies, you can get very slight rotation but getting it fully strait takes zero effort, no need for rulers.