SharkWelding USA PN-26-6M Die Grinder Cut-Off Wheel and Mandrel Kit, 3-Inch x 1/32" x 3/8” Shark Type-1 Double-Reinforced Thin Wheels, 54 Grit (6 Cutting Discs and 1 Mandrel)

Sturdy well made. Last longer than orher discs.

Been using 2 inch wheels. These 3 inch wheel cuts much faster and also cooler because less time to generate more heat. The supplied arbor is a real plus. Did have to dress a tiny bit to run truer. Great wheels.

Great products. I don’t recommend using this on a compact die grinder. It took out the bearings on my brand new Mikita compact die grinder.

Works well

Runs true when used in a drill press. I've used mine for trimming down 223 brass to be sized into 300 AAC Blackout. I made a little jig to hold seven at a time and it cuts very rapidly. I have done over 200 cases so far and it has worn down the disk very little. I don't know how it will cut in steel but for what I have been using it, it does the job nicely.

Metal cutting wheels worked perfect in 1350 rpm hand drill to trim old oak stair treads already installed. Tried a wood cutting blade first with no success. Pretty much wore out these blades just cutting through a length of about 3 1/2 feet of stair tread width. Need to exercise patience and apply only a gentle forward force to get the wheels to cut the wood. One wheel broke off around the spindle and stuck in the wood. Pulled out easily. Blades made for a job safely & successfully completed.

Just a correction to the description, everything else looks fine. Recommend

Can be used with drill or die grinder. Use die grinderI used mine with a cordless dril, the rpm is 2000 rpm and have to cut slower with light pressure on cutting wheel

Like, did the jobs I wanted to get done

Very happy with this purchase!

Cheap material.