Dupli-Color BHA0978-6 PK (EBHA09787-6 PK) Taffeta White Honda Perfect Match Automotive Paint - 8 oz. Aerosol, (Case of 6)

I'm using this on an old truck with dents, dings, and rust. I'm not trying to make it look like it rolled off the showroom, just trying to slow down the eventual degradation into a rolling rust bucket. That being said, I've been really happy with how well this paint blends in with the factory paint. I've treated rust areas and chips, primed, and top coated with this paint and when driving by at 30 miles per hour you'd never know. Even when I walk around the truck it is hard to tell what areas have been touched up, and when those parts are visible, it isn't because of the paint, it is because of the issues in the base layers. The paint applies really thin so you can easily feather it in to the surrounding paint. You don't have to be skilled with it, just do the bare minimums, clean the area, and 2-3 light coats (drying in between) are WAY better then trying to put on a heavy coat that will run. As long as you don't get greedy and go too heavy, you'll be happy with the results.

This worked pretty well. It is very runny and doesn't aerosolize great, so it will drip if not used carefully. Use very light coats (I needed 3) and take plenty of time for each coat to dry. The color matches our black Toyota Prius well. I wish I had just sprayed the scratches and not tried to spray the entire fender, because the color blends well enough that there wouldn't be visible streaks. I applied coat 2 too heavily, and had some drips, which I then had to wipe off and sand and reapply. The final result is better than it was before painting, but I wish I had been more patient with the process.

I ordered several boxes of this paint for the use on a old 2008 Ram 1500, I only had issues with 3 cans in which the seller replaced 2 for free with my next order, as I was able to use a different nozzle on the 3rd can.

Perfect color match only wish cans were bigger. Needed 4 cans for trunk lid of 2008 Civic.

My front bumper had some pretty bad scuffs and as you can see from the pictures, they are pretty much gone. This was my first paint job and I would say it came out good even though I got some pretty bad orange peel. Basically all I did was sand down the panel with 600 grit sandpaper (it was the lowest grit I had) and started to paint once the entire panel was nice and smooth. Did about 3 coats and then 3 coats of clear coat. A day later I sanded it down a little to smooth out the orange peel and applied the wax and polish and that's it. I'd say the result is very good even though you can slightly see the bad scratch from before.

Matched my 07 Chevy 2500HD Classic and it worked great to cover rust and paint match my mirrors just make sure you prime the surface first or it will have a darker cooler if it doesn't set right.

This paint sprayed on nicely and uniformly. It was an exact match to my previous red color. I found that this paint went a long ways in covering my repair work and I was very happy with this product.

Paint matches would like a replacement can of paint.

perfect

It was used for being the correct colour match for a car manufacturers paint.

Best oneComments were spot on