MYJOR Brand High Temperature Tissue Paper Tape, Used to Protect CPU and 3D Printer Work Surface, PCB Circuit Board Professionals (1.2" x 108ft x 1)

easy to use and works excellent, used it on KH1 with ease

I use Kapton tape for protecting electronic components that I do not want to melt off of the circuit board when using my air desoldering station. This is just sticky enough to stay in place, seems to be the right film thickness (1 mil) and cuts like the mil-quality stuff.I have also used Kapton for a protective layer over loose radioactive materials when doing gamma ray spectroscopy. I had found that the old way of using scotch style tape would break down over a few years due to the constant radiation exposure. Kapton tape was intended for use on satellites and spacecraft so it is resistant to that type of deterioration. It blocks alpha particles but beta particles and gamma rays are barely attenuated.

Not exactly identical to Kapton tape, both in a positive and negative attribute.Pros: - Price for performance is excellent value- Excellent resistance to extreme temperatures. Measured through infrared and direct measurement found that - film deformation began at 673 degrees and at 769 degrees, while the film appeared to burn, it appears that it is the adhesive that carbonized as the film itself exhibited no perforations after being heated to nearly 800 degrees. YMMV, but these are the temps I observed when testing heat resistance - Physical dimensions and thickness is similar if not more robust than Kapton film. - Comes on a rigid plastic spool identical to genuine Kapton, not cheap cardboard or similar cheap material making them tough enough to toss into a electronics tool bag without concernCons:The only complaint I would bring up is the relatively weak strength of the adhesive compared to brand name Kapton film and several similar products. This is not a deal killer as test adhesive will adequately hold in most applications as long as you clean the surface thoroughly before attempting to apply the film.

I am using this for a hobby application where I am trying to prevent electrical parts from touching each other and prevent shorts. This tape is very thin (just as described), but still seems to be very durable. It can be a little hard to use, at least in my application and with older and clumsier fingers, but once I get it into place it does the job. Getting multiple widths is also a great plus!

Good tape, but could be stickier

Good deal on an assortment of kapton tape. On the thin side but strong enough for most applications. Will buy again!

this works well but does tend to shrink under high tempetures

Bought this set for soldering projects and replacing game cart batteries. The tape held up fine and held what I needed in place. Also provided protection where it was needed. Good value and I love the different-size tapes. It allows me to choose exactly what I need to save on resources.

Super merci

Good

I've tested all 4 rolls of the tape I received with both a soldering iron and hot air rework station at various temperatures below the listed specification (280c long-term temp). The tape deforms and melts at less than 160-180c temperatures, much less than listed and real Kapton tape.

Received the package and quickly tested with soldering iron heated to 300C° The tape did not burn and/or melt. This is good quality and correctly advertised product. Thank you.

Lots of sizes and it's easy to use