Pointing Grouting gun/Mortar sprayer - CCJ Sprayer

Our house has a fieldstone cellar foundation from the 1800’s, and I needed to mortar between the stones. With one area behind a large oil tank, conventional mortar tools wouldn’t work with only about 10”-12” of space between the tank and the cellar wall. With this, using the right angle adapter, I could work from both sides and direct mortar to the cracks.Tips: Fill a spray bottle with diesel and spray interior with diesel before each use and it will clean up much easier.The device to attach the drill to the auger unit did not fit my DeWalt nor Milwaukee drills, as the front of these cordless drills are tapered, and the clamp won’t work. It isn’t needed anyway. With a washer and shortened carriage bolt and nut, the auger can be held in place by using the weldment tab hole. There is not enough torque of the drill and auger to require the clamp, This will all make sense when you are looking at the unit.By using a good admix in mortar to assist flow I had no problems. I used a slightly wetter slump mix than for laying block or brick, but this tool does not need runny mortar when using an acrylic type admix as per label.Con’s- 1. It’s expensive.2. The last cup or so of mortar doesn’t pump out well, but this is solved by getting gravity helping and pumping last of mortar in hopper back into a bucket.3. It’s heavy when loaded. With bad shoulders I was helped by securing a rope running along floor joists overhead and suspending the unit for the areas I could only reach into, and not stand next to. A cam action tiedown made height adjustment easy. As far as the areas easy to reach, this is much faster than using a trowel, etc.. It can get air bubbles in holes, so one must still pack the mortar in.

Seems like it may work ok for vertical work with bigger joints. Have to make sure the mortar is very rich and creamy to work at all. Not much good for flat work and awkward to handle. There are much better less expensive options out there.

article sérieux, efficace conforme à mon attente à mon premier essai.

Dopo avere provato diversi sistemi per fugare i muri in sasso ho voluto provare il prodotto CCJ Sprayer, ottimo prodotto Complimenti

Hallo ich war anfangs skeptisch. aber ich muß zugeben dass dieses Teil für die Renovierung meines Hauses eines der mistgebrauchten Werkzeuge war.Damit wurden 4,5 T Lehmputz, 2 T Sockelputz und 2 T Mineralputz verarbeitet. Fugearbeiten zähle ich gar nicht mit. Bis man mit der Handhabung vertraut ist kann etwas dauern, Wie fest oder flüssig muss der Putz sein wieviel Druckluft benötigt man für welche Arbeit usw. Aber wenn der erste Tag vergangen ist ist dieses Werkzeug ein must have bei jeder Renovierung

ist ein super Machin prefekt für große Fugen ,mit diese machin kann mann verputzen aber ist klein.

I bought this for £360 now I'm getting charged £95.23 import charges. £360 includes delivery to my address as stated when bought there was no mention of extra charges