This 5050 4 Pin LED strip light connnector kit provides the most parts you need for a DIY LED strip light project. ●The RGB extension cable is for 5050 RGB Color Changing LED strip light, LED transformer, lamps and lead wire connection, led splitter connection, bending a strip around corner etc. ●The T shape LED strip connector is for 3 way quick splitter connection. ●The LED strip jumper connector is used for connecting RGB 5050 flexible LED light strips and strip segments around corner. ●The strip to RGB controller jumper for connecting RGB 5050 LED rope light and segments to LED RGB controller ●The l shaped led strip connector is used when you need to spring your light strips around sharp 90 degree corner. ●The gapless led strip connector helps connect two RGB 5050 flexible LED tape light and strip segments easily and quickly without soldering. ●The LED strip clip is easy to fix the light strip by one screw, and take down the LED strip light from the other end freely when replace or maintain it. ●4 Pin Male to Male Connector is used between LED strip and remote controller, or between two LED strips. Warm Reminder: If you meet any problems during installation, please contact us by email on Amzon of "Ask a question" button, you will get a reply within 24 hours. Package Includes: 1 x 16.4FT RGB Extension Cable 2 x T Shape Connectors 2 x LED strip jumper connector 2 x Strip to RGB Controller Jumper 2 x L Shape Connectors 2 x Gapless LED strip Connector 20 x LED strip light clips 20x 4 Pin Male to Male Connector 2x Strip to Wire Quick Connector
K**Y
Once worked out good for the price
Took a lot of fiddling but once I had worked it out it was pretty straight forward. Does the job and cheap. Would probably use again now I have worked it out.
N**E
Great selection of connectors
A great selection of different connector for my 12v led lights
K**J
Missing parts!
Hi. I was very disappointed as the 2 x Splitter cables are missing from the package. There is a clear image of them on the order I placed and it is in the description of the package, but there are no splitter cables in the packet I received. I could not complete my Christmas light setup so I was quite annoyed that it was missing. The rest of the items were spot on.
A**R
Works perfectly with my Govee light set up
This worked perfectly for my Govee RGB Light (10mm strip). A little bit pernickity to set up and ensure that all the connections were good, but I had no issues with any of the componentsWhen using the wire -> strip adapters I had to separate the strands of wire to get them to fall properly into the channels (easy to do by hand) and after removing the glue protector, fold the ends of the strips to connect the correct way round.When using the 90 degree corners I peeled back the protector and the glue to allow me to fit the led strip under the plastic notches to ensure connection.
S**S
Hardly an out-of-the-box solution
The plastic connectors work fine for the led strip but are not suitable to connecting the ribbon. I had to solder the cables onto the connectors to get this working reliably.If you're looking for a simple clip solution, this is not the kit for you.Also, hardly any clips, and a few had missing metal tabs.
P**E
Good selection of connectors
This kit provides several options for connecting 5050 4pin LED strips. I ended up cutting a 5 metre length of strip in three places in order to position the leds where I wanted them, and used all the different cables and jumpers; that's a lot of joints. Connecting to the strip where it has been cut can be fiddly and requires patience and good eyesight (better than mine ideally). The connector tabs must be gently lifted to slide the strip end under them before clamping them in position- I used a magnifying glass. Great care is needed to ensure all connections are sound, it only takes one faulty one to make the whole system malfunction- I initially had some sections not working, different colours in different sections, etc. I eventually located a bad connection by continuity testing using a multimeter. These types of connector can be bought from various suppliers, my comments probably apply equally to all of them.Good luck!
H**H
Works no problem
Just as it says on the tin - my only bit of advice is that when using the 90 degree connectors, you might need to push the metal bars against the LED strip more firmly to ensure connectivity - simply closing the connector does not guarantee this.
K**N
4/5. Good but I personally had issues
It’s good! But has issues. Some of the connectors do NOT grip enough. Half the LED’s were green and the rest only showing blue.... after changing for a different connector worked fine. Other than this small issue, faultless. Easy and tidy!
Trustpilot
5 days ago
3 weeks ago
