Universal TV Stand - Swivel Tabletop TV Stand with Mount for 32 to 55 inch Flat Screens, Height Adjustable TV Stand Base Replacement with Tempered Glass, Hold up to 88lbs Screens by HUVIBE

I did some very thorough research online and some adventuring in stores, and I have confirmed the following:Samsung HDTV models listed below require an "M8 - 1.25 x 43mm" bolt in the bottom two screw holes, which does not really exist outside of the internet and cannot be found in hardware stores. Even the online resellers that are stating they sell 43mm bolts are actually 45mm and are just using false advertisement.Alternatively, you can go to a hardware store and use the slightly more popular "M8 - 1.25 x 45mm" bolt with very minor space between the Part F bracket and the TV back and still have a solid connection without issue, which is what I have done. You can add a washer or two and the connection should be really solid. I found my bolts at a LOWE'S store, and they were the only ones available. I also tried Home Depot and ACE Hardware, who had nothing.If absolutely necessary and people cannot find either of these bolts, the "M8 - 1.25 x 50mm" size is almost just as comfortable of a fit as the 45mm, though now you have to expect a bit more wobble, unless you want to add about 6 washers.When I went to LOWE'S, one of the employees there had created a list of TV models by Samsung that he's run into that require these bolts. He pulled out the paper and read it off and showed me. He explained all of the issues I have mentioned here - that there is no such thing as a 43mm bolt, unless it's custom made online somewhere, or if you cut the bolt yourself to size(which would be easier to do if you start with a 50mm bolt). He also explained how people were being scammed on Amazon by people selling 43mm bolts but they were actually 45mm. I took a photo of his list and wrote down all supported models in it. I was also notified that it is nearly impossible to find the 45mm bolts in a store without it being a hex-top bolt, so you'll need a socket wrench to install the bolts into the TV if you're lucky enough to find them in a store. Otherwise, people can go online and grab them on Amazon. They're more expensive on Amazon though by a few dollars. They're only a few cents in stores. After reading many reviews, I've discovered that LOWE'S and ACE Hardware seem to be the best stores to find these bolts.Here's the list of Samsung HDTV models requiring the 43mm-45mm bolts:-- D6000-- D6400-- D6450-- D6500-- D6900-- MU8500-- NU6070-- NU6900-- NU7100-- KS8000-- NU8000-- MU8000-- RU7100-- RU8000-- Q6 (Q6FN/Q6/Q6F)-- Q8 (Q8FN/Q8/Q8F)-- Q60 (Q60/Q60R)-- Q70 (Q70/Q70R)-- Q80 (Q80/Q80R)You need to please add this information in the description of your mount stand. Mention that you do not provide the two bottom bolts necessary for these Samsung models. However, I have a better idea - why not upgrade your mount stand product by adding 45mm M8 bolts in it. Make a newer version. That will make your product even more valuable to costumers looking for a mount. If they see a description like that, their reaction would be similar to, "Wow! This product swivels, tilts, has height adjustment, AND has Samsung support right out of the box! Amazing!" then you'll only receive more success. I'll be honest, your product is REALLY good. I couldn't be happier, but the headache of searching these bolts out are insane, and cost way too much on Amazon. We're talking $6.15 - $15.00 for these bolts, when they are only worth about 97 cents a pop in store. Just update your product to a new model that included the M8 45mm bolt with washers and add an extra $6.00 to the cost of purchase. You'll only succeed further with this great product because you'll be giving hope to everyone that owns a Samsung these days!Just a note for anyone unaware, "M8" basically stands for the width size of 1.25mm, while the other sizes (43, 45, 50, etc.) are bolt lengths. No matter what someone buys, they need an M8, but with the confusion involved in the length sizing, it's basically whatever decision you decide to make. TLDR; If you have a Samsung, you need "M8 - 1.25 x 45mm" bolts.

This stand allowed me to fit my 55 inch tv on a 36 inch wide furniture piece. All these TVs come with wide spread tiny legs so instead of having to buy a new piece of furniture to accommodate the tv, this stand works perfectly. It’s very sturdy, looks great, and fit my budget!

Easy to use. Wish it was a little taller. Didn't work well for bedroom. Maybe better for living room fOr taller furniture

Very good product. Looks great. Heavy base. Fit my Samsung 6 series well but I did have to buy extra long screws for my series 8. Thankfully the booklet says what screw and it was easy to find at the hardware store. M8x1.25x45mm

Works great didn't take long to assemble, had the hardware I needed. And once mounted it's very simple to turn the tv which ever way you need it.

Stand is crooked and there's seemingly no way to fix it. Very frustrating. I'll be returning it if I can get it disassembled since the hex screw heads stripped.

Paired this stand with a TCL 55" tv. The stand is very well built and sturdy. I was looking for an exact tv height, so I could place my center speaker directly under the tv. Getting exact height took a little of trial an error. The stand support is nearly hidden with the center speaker placed directly below the tv, giving the appearance of a wall mounted tv. Would not hesitate to purchase again.

I liked the first one so much I re-ordered it. The second one, however was not exactly the same as the first. It did not tilt up and down. Disappointed that it was not exactly the same as I expected it to be

Just put this on our Phillips 50" tv, and works great. Swivels , very sturdy, and looks great!

Had no problem assembling it. Looks good, works fine. It was also one of the least expensive items in this category. Would recommend this product.

We really like this stand and would recommend it. Easy to assemble. I had to drill 2 of the holes on BRACKET C in order to get all 4 bolts in. Not a big deal (light drilling) 1/4 inch bit and small drill. Great stand for a good price. Highly recommend it!

Amazing stand, solid build rotating function I was looking for it’s perfect!

Easy to assemble and very sturdy.