K1: (ON/OFF) Button nearest USB on 2 button side of unit K2: (Shutter Button) Button furthest from USB on 2 button side of unit K3: (Motion Detect) Button on single (1) button side of unit K1: (on/off) Long press will give vibration and blue then red light indicating standby. While Red light is indicating standby, a short press on K2, will cause a photo to be taken. A momentary blue light and vibration will be the indication of success. Repeat to take more photos. While in standby (red LED) a long press of K2 will give you two vibration indications and red LED flashing. Video will begin capture after the third red flash. A short press on K2 will end video recording, 1 vibration and return camera to standby mode (Red LED). In standby mode, a short press of K3 (only button on single button side) will give 3 vibrations red LED will flash 4 times, indicating motion detect mode is on. When motion is detected video will begin recording after 1 blue flash of LED. A short press of K3 will end motion detect mode and return to standby. Trouble shooting: If K1 does not turn unit on, fully charging then pressing both K1 and K2 together will reset the unit. Time Date can be set by looking for a file on the memory card named tag.txt, open and edit with notepad. You will find a single line of text containing a date /time (2012-05-01 23:59:59). Changing this to current time/date then saving, then removing USB from the computer and starting a video, will cause the date time to change to whatever you set, and continue from there. Standby: Testing this leads me to believe that standby lasts for 2 minutes of no button presses, unless you are in motion detect mode. Charging battery is accomplished by connecting to powered USB port, blue light indicated charging, when blue LED turns off, charging is complete.
Trustpilot
1 month ago
2 months ago
