ESUPPORT4 x Universal 12V Motorcycle Turn Signal LED Load Resistor Flash Blinker Fix Error

Works great flash is still a little fast but keeps the lights from burning out , needed to change connection end to fit my setup and could use some instructions for hook up

Solidly built and ample wiring leads. Highly recommendedUsed on a 2010 Harley to add LEDs for running/turn/brake

They’re bigger than they look. Make sure you have adequate space for them to fit and breathe. Gotta have space for heat dispersion.

I installed flush mount LED turn signals and has hazard flashing. I put one of each turn signal, I already installed bullet connector on the turn signals so these were plug and play. In my experience this doesn't solve hyper flashing, this fixes hazard flashing (both turn signals flashing instead of one at a time). To solve fast flash/hyper flash get a new relay.

Worked for my Navi when converting to LED turn signals. Good product!

Added LED signals to a 2009 Suzuki DR650 and added one of these in line to all 4 lights. Each signal still flashed just as fast as they did without these resistors. I ended up buying the correct flasher relay and removing these resistors and that was the ticket. Even though the flasher relay says it fits my bike, the connectors are wrong so I just cut both off and crimped a weatherproof connector to both. Here is the flasher that worked for me:https://www.amazon.com/dp/B0C71B58QM?psc=1&ref=ppx_yo2ov_dt_b_product_details

They work but get very very hot very very fast. It fixed the issue of no light and dem light but still have hyper flash. Make sure you mount on the frame to help cool them.

I love how simple this was. The hardest part is hiding the wires and even that's easy. I replaced the stock halogen bulb with 2 separate LEDs on both sides in the front. I added 1 resistor to each side (2 total) and that fixed the hyper flash and dim lighting.

So I bought 2 of these flasher fixers from a BIG Store in town for double the price than these ones that give you 4 and these are by far the BEST value for the exact same thing!If your in need to fix the hyper flash found when installing LED lights to your vehicle or motorbike then pick these ones up!

Product works good it fixed my leds that stayed lit and not flashing. But it only worked with and led blinker module. and i only needed 2 in the front

En fait pour être plus précis, branché ou pas, aucun effet. Donc inutile, en plus de ne pas avoir de manuel d'installation. Pourquoi tous ces fils? Si on aucune connaissance en électronique ou en électricité automobile, impossible de déterminer comment brancher ça sans faire de recherche. Mais même là, en sachant comment faire, ça ne marche juste pas. J'ai même essayer d'en mettre deux afin d'augmenter la résistance totale (j'ai lu que ça pouvait parfois résoudre le problème), moi dans mon cas rien à faire. Peu importe le sens du branchement, peu importe si installé en parrallele ou en série, rien à faire.