Energy Suspension3.3190G Front Control Arm Bushing Set for Silverado/K1500 4WD

Works great on my 2003 Suburban 1500 4WD! Very sturdy replacement for worn rubber bushings, precise fit. Complete busing set for upper and lower control arms and shock absorber.You need to reuse all metal parts of the upper control arm bushings: First, I pried out both end caps. A ball joint press removed the entire busing. Finally I cut the old rubber bushing with a knife to release the metal shell.For the lower control arm bushings I used a drill and a blow torch to loose the rubber surrounding the metal shell. Then I used a ball joint press on the metal shell. Once the shell is out the rubber comes out easily.Pro-tip: Insert the polyurethane bushings first and then insert the metal shell. Makes life a lot easier! Also, remember on which side the control arm bushing shoulders go in!

I will not lie this was every hard to do total days is 4 days but do one bushing at a time. The upper control arm bushing has a cap on the inside remove it with big flat screwdriver and BFH to pop it off the drill the old bushing out. Replace with new bushing and done. One more thing my bushing for the shocks is the wrong bushing just a heads up

These bushings were a great replacement to my worn factory bushings in my 4wd 2002 Yukon. Lube them VERY good before installing to prevent squeaks.

This set worked perfectly. I would recommend to anyone. The front end is so much more positive and less sloppy with these installed. Also took an alignment perfectly.

WOOOOO

excellent product