🔌 Power Up Your Monitoring Game!
The EPEVER MT-50 Remote Meter is a cutting-edge LCD display designed for seamless integration with Tracer and BN Series MPPT charge controllers. It automatically identifies and displays controller types and parameters, providing real-time operational data in multiple formats. With six easy-to-use navigation keys and the convenience of no external power supply, this meter is a must-have for efficient energy management.
R**N
Working Very Well So Far
Easy to install and working well with one 200watt 24v solar panel and a 3000watt pure sine wave inverter. Using for SHTF or power loss to keep my refrigerator’s and chest freezer running. System has four 100amp hour CHINS LiFePO4 batteries. My pea brain had to strain to get the programming correctly set. Running a test right now,,, everything is working perfectly so far!
O**7
Works with SolsarEpic charge controller. Will NOT work with Renogy controller.
First review: *** Bought a Renogy charge controller here. It said it needed a MT-50 remote meter to work. I typed in MT-50 Renogy remote meter and the Amazon system displayed this one. Ordered and received this one. It does not work. It just sets there displaying (connecting) and never connects to the charge controller.I don't think this device works with Renogy and I'm real ticked to send it back.I also have no idea what remote meter may work with the Renogy controller. I have an old 40A renogy that works good with it's MT-5 meter, I most likely will send the new controller back also since amazon is not listing a meter for the controller.Yes I do know what I am doing, using and installed a least a dozen solar systems and charge controllers.UPDATE ***** !! Ok, I ordered a second one of these with a 40 Amp MPPT BN series controller from EPSolar/SolarEpic. It works 100%, controls and monitors the charge controller as you would expect. Just be careful, don't order this if you are buying the Renogy Commander. The fireware is different. Otherwise it's a great remote meter, lots of control, info screens and monitoring screens. Considering the size of the screen it's impressive, take your time and learn the displays.
P**P
quality item
a bit difficult to setup... more difficult determining what parameters to set.
S**T
You need this for the SolarEpic Controller.
You need this to set up your Solar Epic Charge Controller. There's an identical looking Meter but it's for the Renogy Charge Controller and it's more expensive (apparently Renogy made some wiring changes that prevent people from buying this meter which is cheaper. Go figure.)It works well, but the menu is not very intuitive (or maybe it's me). It took me awhile to figure out why I could not change any settings. Under "Control Parameter" you need to select "User" to have changeable settings. Otherwise they are pre-programmed and unchangeable for Sealed, Gel, and Flooded. I needed to lower the Charge Limit Voltage a bit for my particular type of Sealed battery. I also turned off Equalization as it's not normally used for Sealed batteries.There's also a software program you can download instead of buying this, but I never tried it so I can't comment on it.
K**R
Still working on setup
Good looking product. Arrived quick and good wrapped. Still working on the set up. The manual is somewhat difficult written for a non electronic nerd. can not type in the 'user' or even datum/time data. Says always : Save denied (or so). Also it had not automatic recognized the 12 V battery voltage on the 40A controller, shoes 25 V. Can not change that also. The 40A ChargeController work but only 'default'.But I have GEL batteries.Will play bit longer this week and by no success will call for help. Will change to 5 star when upset work finally. why is it possible to get for a good product such a bad flimsy manual? (not only for this particular)
J**I
Great Remote Monitor
I purchased this meter at the same time as my 40 amp Solarepic charge controller. The cable that came with the meter was too short to be useful, so I replaced it with a 30ft standard ethernet cable. I did have to send the first meter back because although it worked, the display had two bad horozantal lines. The second one had a nice crisp display. When in monitor mode the display shows the voltage and current being sent to the batteries, the charge state of the battery bank, and the "load" status. This meter also allows you to program or set certain parameters on the charge controller itself such as the presets for flooded batteries. I like that the meter displays the historical data from the charge controller as well as battery status. You can also turn the load on or off from the meter's control panel.
W**M
Great support
Must have, easy to use so many YouTube videos on this thing. If by chance you have an issue with it support is super easy to work with I buy it again.
K**A
Plastic casing did not fit screws
The monitor works as advertised. But the plastic casing you see in my hand, if you look into it you see a metal thread that the screws are supposed to be screwed into. None of those screws fit the thread. And none of the screws I had laying around fit that metal thread either. I learned the hard way when trying to screw it in all it did was strip the inside. Not too happy about this. I do not have time to return it. So I just drilled it directly into my vehicles paneling. Which is not the best look at all. But I had to do what I had to do
E**R
Works well, as expected!
The meter works well. Monitors current, voltage, power going to battery and battery state of charge.Only complaint is The manual -- could be more user friendly and more English language readable.
I**K
Really like these
Seems to be a quality product.
D**T
some products are okay and some are
product is good but delivery date is an issue
A**R
Great Add On
Product works perfectly. Easy to install, and use. Everything can be seen on one screen.
A**R
Work's great
Works as should can tell where my batteries are at now and what state there in
Trustpilot
3 weeks ago
2 months ago