EZDIY-FAB Addressable RGB LED Strips with Magnet for PC Case,with Remote Control(Compatible with ASUS Aura Sync and MSI Mystic Light Sync)-2 Pack 40CM

Being from EZDIY-FAB I would have thought that they would have come with wires to connect the LED strips to the EZDIY-FAB hub similarly to the fans but unfortunately not.Otherwise, the colours are great and is compatiple with ASUS Aura Sync once I bought the connectors to the hub. The strips are magnetic the packaging was small which was nice.My current case is the Phanteks P400A and the strips fit perfectly along the bottom and top, not ideal for smaller cases though unless you cut them.Overall, they're cheap, decent led strips which I can't fault

the LED strips are bright and easy to install, just plug in and go! (no drivers driver updates or additional software required - besides big brand lighting control software which you likely have installed if you don't plan on using the remote controller) some reviews have complained about a lack of magents, the magnets are actually part of the tear back adhesive backing, so if you want to use the magnets, do not pull back the adhesive tape strip. in my case the lighting controls was handled by MSI mystic lights and is linked directly to the motherboard lighting settings, so that is something to bear in mind if you have an RGB motherboard and want different lighting modes for your strips to the motherboard.My only complaints are that the strips were a little too wide to easily fit into the grooves on my PC case, but with a little force i managed to get them into position, and that the magnetic strip isn't very powerful so they are liable to pull loose if you have tension on the cables (as part of cable management)as with all EZDIY-FAB products, the boxing is clean and simple,contained withing are 2x 3-pin ARGB LED light strips- with adhesive magnetic strip, 1x RGB 3-pin header splitter, 1x Remote control, 1x dual header remote controle node with 2 3-pin RGB connectors and 2 pin molex power plug. the packaging was handled by amazon, and arrived to me in perfect condition and on time

The media could not be loaded.  Well, not what I was actually expecting.They're really decent, bright and colourful.The packaging was small but efficient and the presentation was fine. The inclusion of a remote was alright, but I really wish you had an option for just the 2 cables as these are now waste!About the strips! They ARE magnetic! They are fixed to my case with the magnets for now until my replacement H115i comes, the strips are working with the supplied splitter (even though the board has 2 sockets) and I have one strip running the opposite direction, this is the effect I wanted. Obviously if you put them the same direction (wires going out same side) then they would be precisely the same.In terms of the length they were slightly longer than 40cm, the magnets are on the far end.For the bottom of my glass these were far too long, I cut the magnet off the strip and still they were, going that led strips can simply be cut to length I did a gamble with this kit and cut the last RBG off the end, this made my kit the perfect width to fit the case at the bottom.All in all, can't fault the product at all, it's cheap, bright punchy colours and works with my motherboard entirely.What else could you want?

The media could not be loaded.  seller was very responsive to my questions, build has 2 led strips and 5 RGB fans also from EZ-DIY plus AMD wraith prism cooler. (controlled through the coolermaster wraith prism software)all fans and led strips are connected to the control box (see picture) that comes with the fans (control box fits 10 fans and 2 led strips with optional adapter see link. https://www.amazon.co.uk/gp/product/B0888BP6R4/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)LED strips can be cut to required length see picture my marking is where I cut mine with no problems this is one of the questions I asked the seller first very fast answer.originally wanted to use 2 control boxes to contrast the effect a bit more but remote works on the same frequency so will send info to both boxes at the same time so just connected everything to one control box.Overall I spend about £90 including wraith prism cooler -£28.one fan cable didn't reach so had to cut and solder an extension in but I'm sure they do an extension cable which is how they ramp up the price a bit more with adapters and extensions but still good value.Hope this helps please confirm if it does.

I bought these as I had have the EZDIY-FAB fans with the fan control. I assumed these would connect to the 2 headers on the hub and sync up, but apparently not. I'm kind of confused what actually is used on those connectors now.I'm sure they'll work fine with molex using the RGB header just wasn't how I thought I'd have to be setting them up.:S

Good quality set of D-RGB lights. I bought two of these to spruce up my two systems and put on a light show for the kids. The results look pretty good if you're into all the RGB stuff.The kit is easy to install and use. LED strips come with the option for adhesive or magnet fixing and I found the magnets were adequate in my Phanteks cases. The LED's are very bright and comparable to other high quality branded sets I have used previously. The controller works perfectly with the case all closed up and includes many lighting effects including the all important rainbow wave. 😉 Having a separate lighting controller actually works pretty well as it takes away the nuisance of having to have software installed and running in the background to manage the lighting. Time will tell how long the LED's last but if it's anything like other EZDIY-FAB kit I have used, I expect that longevity won't be an issue.