40Pcs Anwenk 1/4"-20 x 20mm Furniture Screw in Nut Threaded Wood Inserts Bolt Fastener Connector Hex Socket Drive for Wood Furniture Assortment (with Hex Spanner)

I just discovered these little guys and they open your world of possibilities up a little farther. They hold in the wood very well. I used them so that I could bolt on a door for mobile home skirting. Works great!

I purchased these for the price, which is like a tenth of what I'd spend at my local hardware store or a big box store. I suspected I'd get a few duds with defective internal threads but that was not the case — I tested each of the 40 pieces in my set and the internal threads all worked fine with a 1/4-20 threaded foot. That's not to say YOU won't get some duds, just that I did not.I'm also super happy with this mfr's range of available sizes — I felt as if I had some good choice in customizing the insert size to the threaded feet I was using, as well as how far into my project's legs I wanted to go.As far as installing them, I cannot speak to hardwoods right now, but in the soft wood I was using, they were completely painless. I stepped up my drill bit sizes one by one, slowly, always checking level in two directions (I was unable to fit my particular project into a drill press), and I installed them into the legs also very slowly, and also always checking level in two directions.I definitely recommend this product and I will almost certainly buy again.

They’re quality. Thanks.

Using these inserts to provide the 1/4 - 20 threaded holes I need in bottoms of dining chair legs so I can add some nice swivel glides. These worked perfectly. I used a 3/8" drill which provided a good fit for the inserts. You need to screw the inserts into the 3/8" holes. It's a tight fit so I lubricated the outside of the inserts with some melted candle wax to make installation easier and I used a long handle 6mm hex wrench to turn the inserts.

I make wooden knobs for many different projects and I prefer to attach the bolt to the knob in many cases. These are great because they can go into a piece and wont just pull out if stress is put on them like with some tee nuts. They leave the piece with a clean look and I feel like I can depend on them since they are threaded in.

I purchased these for a project that has wooden knobs and ajustable feet and shelves. these worked very well for all three.

Muy buena calidad

I used these on a solid Cherry fold down 4 stage conversion crib/bed I made for my daughter, she was expecting with my second grand baby.. and was looking for something that would make assembly and the conversions simple and easy..Simply put, the Crib is rock solid with these things.. I used 3 in the head board and foot board on each side for the side panels and 3 on each side of the foot board to hold the fold down panel/toddler bed insert panels in and then another 16 for the 2 height adjustable crib mattress support.. 8 for each height adjustment.. locking it to the head and foot board with an L bracket..I wanted to use one tool for all assembly and adjustments, these made it easy to do.. using 1/4-20 cap head screws for everything.. I used a 21/64 or .328 drill for the holes being that the minor thread dia is .322 with calibers..

aun no utilizo estos tornillos pero son tal cual lo que se muestra en la plataforma y se ven de buen material

Good product

I have seen these used in tonnes of Youtube videos and finally decided to try them out.They were a little long for the project i had bought them for, but I used them in another project that I had sitting on the side and they really impressed me!... Very easy to install (I used a 1/4" drill bit before using a 3/8" to finish the hole) and really hold amazingly well ... Great for those projects that you want to be able to take apart!

Inclue une clef exagonal

Good product but not cheap