SPC PERFORMANCE Specialty Products Company 81280 EZ Cam XR 16mm Adjuster Bolt - Pair

Not much else to stay but these things work. Seem stout enough, and the torque spec is accurate for the bolt. Would recommend - just read the instructions.

Worked perfectly on my 2004 Mustang Mach 1. Gave just enough adjustment to correctly align the front. I have Steeda progressive rate springs so it isn't slammed on the ground so I only needed a small amount of camber adjustment. If you are going with a big drop(1 inch or more) you will need the real deal caster/camber plates to get the amount of adjustment you're going to need for proper alignment.

A local shop would charge me $20+ for each and another $90 for the labor to put it in. That would be a whopping $130 plus $80 for the alignment. $23.03 later and a little sweat I was able to put it in myself. This helped adjust my wife's 2006 Honda Odyssey's camber. Other than that nothing fancy. It simply serves its purpose well. I still have to bring the van back to shop for alignment but at $110 or so less.

Didn't provide as much camber as desired with one bolt in the top hole on the strut. Shop got it to -0.7 degrees. They did say that it seemed beefier than the older versions and should not loosen up.

So far so good

2000 Mustang gt convertible dropped 1-1.5 inches, in dire need of camber adjustment. I was chewing through the front tires every year, the insides would bald out like crazy , a 50% difference in tread from the inner and outerOEM specs are -0.75 +/- 1.25 I used a camber reader tool off of amazon and i was getting - 2/3.0 ish camberI drilled out the stock camber plates and it only gave me +/- 1.0 camber adjustment... I needed morethese bolts gave me just enough adjustment to run a happy -1.0 through +1.0so the 1.75 or so whatever is advertised is true to it's claimTake note you can install these on whatever side you want as long as it's the top bolt. I didn't like the fitment I did at first because it moved the stock ABS sensor bracket to the other side so I just switched sides compared to the instructions and it's been over 1000 miles with no issues.beats buying a whole new caster camber plate for 150 bucks!!highly recommend if you're lowered less than 1.5 inches on a mustang.if you're lowered more than 1.5 inches I don't think these would help you out too much!

I always go for SPC's products whenever I can.They're affordable and the build quality is superb.This is for 16mm bolt hole replacement! If you want the 14mm go with SPC 812760Unfortunately my Honda Civic does not have another way of adjusting camber without camber plates so I had to use these bolts.These replace either one or two of the bolts that attach your shock to your car.They adjust easily so you can fine tune your camber but if you want an easier way of doing so, then get some camber plates.

I used these on my 02 mitsubishi galantI had my suspension lowered in the front and I had very bad camber. My tires were bending inward toe was fineThe inner part of my tires in the front of the car were wearing out on the insideTo install I removed the tire removed the top nut and bolt of the spindle where connects to the strut then put in the new camber bolt and bolted it down for nowWent right away to alinment shop to correct the camber. Now my tires wear normally

For dropped cars... works like a charm. Just read the instruction, and presto...

再購入です。事故に遭い念のため交換しました。側面から突っ込まれショックアブソーバーがくの字に曲がるほどの事故でしたが、キャンバーボルトは折れたり損傷した様子もなくそのまま再使用しても問題無さそうな状態でした。通常使用であれば折損などの心配は全く無いと思います。

Worked nicely on my pilot. After changing 200000mile front end the cam was out. These little beauties have me the cam I needed. The old pilot has a sporty stance and improved performance. Installed with a cam meter in about 49 min.

結局使わずじまいですので、性能的なものは未確認です。造りはかなりしっかりしていますので、破損などはまずない製品だと思います。

Product is awesome, great quality, easy to follow instructions and install was a breeze. Lots of adjustment.Now the seller and Amazon at shipping suck. Seller didn't put full address on for delivery. Amazon is totally off on how quickly it will ship and days to delivery. Said 3 to 4 but was 9 days 10 with address issue