Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Silver

*This goes for almost every product I bought from Amazon that made my dream workstation to reality. I'm not a technical writer so don't bash me for it (I wouldn't even care if you did). Just a ramble and brag from a very technical savvy person who gets overexcited with tech things.*Single Column Crank Adjustable Stand up Desk (40”, Black Frame, Black Top)*HyperX Fury S Speed Edition – Pro Gaming Mouse Pad X-Large*AmazonBasics Premium Single Monitor Stand*Phive LED Lamp, Architect Task Lamp, Metal Swing Arm Dimmable Table Lamp with clamp*Mintcraft TWC0534-3L Pipe Strap*Multifunction Desktop Binder Clamp Clip*Uvex Skypar Blue Light Blocking Computer Glasses with SCT-Orange Lens*Self Stick Pencil Tray – Under Desk Holder Pop-up Pen Strorage Drawer Organizer*Yamaha MG06X*Shure SM58-LC*Mount it! Soundbar bracket*Brenton Studios Jaffin Active Stool*Bestek Quick 3.0 charge Power strip Surge Protector.*Tripp Lite 3 Outlet Surge Protector Power Strip with Desk Clamp, 10ft. Cord, 510 Joules, 2 USB Charging Ports, Black, 20K Insurance & (TLP310USBC)I can't ask for a better desk (*Single Column Crank Adjustable Stand up Desk (40”, Black Frame, Black Top). I've had this desk for nearly 6 months before writing this review and I just absolutely loved it. Bought it used and shipped by amazon for about $150. Think brand new runs about $240 or something. Who cares, I did save some money because I wanted all the extras to go with this desk [34"5k monitor (34WK95), clamp on monitor adjustable arm (*AmazonBasics Premium Single Monitor Stand), clamp on desk lamp (*Phive LED Lamp) pen organizer mount (*Self Stick Pencil Tray), clamp on surge protector (*Tripp Lite Surge Protector), Desk Clamp Binder Clip, adjustable stool(Brenton Studios Jaffin Active Stool), and underneath laptop mount(*Mintcraft pipe strap] so yeah, buying all that equipment ran up the price to build my rolling workstation.Buying it used, amazon did mention that it had cosmetic damages which was fine for me because really its mainly the framework I wanted. The desk part did have a few scuffs and chips and not like I couldn't fix it or just build the tabletop to my liking buying the wood from a local hardware store which initially was the plan. It;s not so much a bothersome for me because after 6 months, I still havent changed it and been using it for productivity anyway.Why this crank adjustable over an electric adjustable desk? PRICE is right! The crank is not difficult at all and only takes a few seconds vs an electric with single or dual motor where I would have to worry about the motor going out in the future. (I plan to keep this desk for many many many years). Motor will eventually go out and would have to look for another or fix it yourself. The size of the desk was perfect for portability going through doors from one room to the next while most electric stand up desk have it too wide for it and/or buy the desktop separate.I mainly work from home as I run businesses from home and part of it is graphic designing. Working from home has its pros and cons depending on discipline you are and that discipline can change from time to time. You can easily get lazy or lose focus from distraction because you a re at home thus why I move from master bedroom to another room to family room, to even outside to find my zone or just to wherever I feel like working. I can stand up and sit while working and if I get tired I use the *Brenton Studios Jaffin Active Stool to rest my butt on it. If I want to work lazy while watching TV in the family room, I can move my desk near the recliner, prop my foot up and pull out the monitor out attached to *Amazon Basic single arm mount and it extends far, high, light, rotate, tilt and everything to move it where I need it to be. Laying down on the bed as well is just the same and adjusting the desk height, easy as a crank.] Even if I have a party at home I can roll my desk out and use my computer as a karaoke system by using youtube (type karaoke before the song), connect my analog mixer (Yamaha MG06X) along with my mics (Shure SM58-LC) and output the sound to my living room system, or my *Altec Lansing ALP-X800 if outside by line in all you need is the cable 3.5 to rca to aux converters. It rocks. To complete my system Im just waiting for soundbar to come down in price or refurbished (preferably the Yamaha MusicCast Bar 400) to attach to my monitor on the mount with *Mount-it Soundbar Bracket and mount the sub on the left side of the foot of my desk opposite of my stool (Brenton Studios Jaffin Active Stool).All the power is attached to the Tripp Lite Surge Protector, although its only 3 AC plugs I only use 2 mainly for monitor (which charges my macbook pro underneath the desk using just a piece of wood and mounted with *Mintcraft TWC0534-3L Pipe Strap) and 1 for the light. The other will go to my soundbar once I receive it. 2 USB ports will charge my phone, ipad, or my apple pencil. I don’t really need the sound bar since I have 2 homepods, apple express that connects to an old subwoofer, a Sonos Beam just received and can airplay but just want sound with a direct connection since that is limited to my bedroom. I tried to connect the Sonos Beam directly to my macbook pro but 2017 they took out SPDIF stereo out and can’t directly connect to it. I plan on returning the Beam back to bestbuy since it gets out of sync with my music or appleTV and cant justify that price tag. Back to the Tripp Lite, its great because it clamps on my desk with a 10ft cord so I can just plug it anywhere and have the reachability without the cord getting in the way. When I move the desk, I used the *Multifunction Desktop Binder Clamp Clip to roll my power cord and hang on it. I’ve purchased the Bestek Surge Protector and mounted that on my headboard. I love that thing because of the six outlet, 4 USB with one of them on Quickcharge. I was planning to buying another to mount it to this desk but cons of it 1) I would waste the perfect use of my Tripp Lite that’s conveniently place right next to my monitor mount 2) I would probably have to mount it underneath my desk somewhere and make it hard to get to rather that on the top. 3) The cord is 6ft compared to the Tripp Lite’s 10ft and limit my portability of my desk.The cleanliness of my desk (at least most times when working and not like how pictured above lol) goes because of these accessories:*AmazonBasics Premium Single Monitor Stand – Clears desk space and can extend far, up, down, tilt, swivel and rotate to where I need it depending I put the workstation*Tripp Lite 3 Outlet Surge Protector Power Strip with Desk Clamp – Its out of the way and stays right next my monitor stand. Cord is long for portability.*Phive LED Lamp – Clamps on to my desk rather than on top of it. I can slide it anywhere, adjust the arms to where I need it (high or low). Has great lighting when I need it and is dimmable to what I want depending on time of day.*Self Stick Pencil Tray – Under Desk Holder Pop-up Pen Strorage Drawer Organizer – I need to use pens and this gets rid of the clutter of having a cup or pen holder on the desk with pens. It just hides underneath my desk and if I need a pen, I just push it in to pop out the storage case. Its mounted just by 3M tape which is very strong and perfect for pens because not a lot of weight to it.*Multifunction Desktop Binder Clamp Clip – I actually have 2. I used to hold my pens in a cup and put that cup on the binder clip. I’ve gon away from it because of the storage pencil above but now use it to perfectly hold my power cord. I hang it from there when moving my desk or clamp the cord underneath it so it gets out of the way.*HyperX Fury S Speed Edition – Pro Gaming Mouse Pad X-Large - This pad is XL and great. It covers my desk perfectly and can move my keyboard and mouse with out needing to move a tiny mouse pad and have my keyboard half on or half off the little pad. And because I move around using this desk, I can just move my keyboard and mouse to any corner or middle of the desk depending on how Im using the desk. I also use it to stash papers underneath.

I used to use those HUANUO arms which are extremely sturdy but have one fatal flaw: their tilt mechanism is flimsy plastic and not up to par with the rest of the arm. I like to keep my monitors low and tilted up, and when using the HUANUO arms with a 27 inch Samsung Odyssey G7 (under the rated weight), it required me to crank on the tilt mechanism with an allen key EXTREMELY hard to get it tight enough to maintain the tilt angle, to the point where it felt like it could break. Even then it was not sturdy.This arm is a game changer for me. The tilt mechanism is all metal with a heavy spring. Perfect for a Samsung Odyssey G7 and can probably handle more.

So I had asked the question as to whether the connecting pieces between the monitor and tilt/swivel were metal or not - but before I got an answer I decided to just go for it and try myself (overnight delivery=awesome). I can tell you - compared to the cheaper arm I bought for my Huion Kamvas 24 Plus this thing is superior in every way.The entire thing is metal - including the pieces that control tilt. The cheaper arm I had bought had plastic connectors - and although it seemed sturdy there as a level of "bounce" and wobbliness that made me uncomfortable with my expensive tablet (and especially since I bought the arm to move the tablet in and out of drawing position, these joints will be exercised/stressed frequently).A lot of people are complaining about where to find the tension screws - mine came with stickers literally pointing to them so they must have read these reviews and updated it :).In my case I used the screw/grommet mount by drilling a small hole in my desk (its an older desk and I cant really access the back of it since it is against the wall). Obviously that's up to you and how permanent you think the arm will be - but honestly considering how insanely useful an arm is (versus lying flat on a desk and taking up a huge amount of space) I'd probably drill a hole even in a nice desk.My only complaint is that the tilt seems pretty tight even with the tension all the way loose (and it seems to be all the way loose on shipment as I could not unscrew it any more). But... it needs to be pretty tight anyway with a monitor this size. It will probably loosen up a bit over time.After installation, the monitor still has just a little bit of wobble when extended, but is *noticeably* more stable than the old one.Overall I am glad I upgraded.Tips1 - if you use the screw/grommet mount you might want to put a piece of tape on top of the screw head BEFORE you mount the silver plate to the lower stand. This is just to keep it from falling into the tube.2 - the unit came with vesa mount screws that have "handles" you can use to screw in with fingertips. I don't recommend these if you intend to re-position frequently because they stick out enough for the monitor to hit them with tight bends.

My first foray into monitor arms was with Ergotron for a beast of a tablet monitor many years ago and was aghast at the cost. Since then, I have switched to the Amazon brand and never looked back. These are easy to install, buff enough to hold 20+ lb monitors and Wacom Cintiqs, and have held up both aesthetically and functionally through multiple moves. Definitely recommend holding onto the included hex key so you can make adjustments to the tension if you don't have a set.Excellent purchase, especially when on sale.

HP(ヒューレット・パッカード) シングルモニターアーム BT861AAと合わせて複数購入、既に書かれてますが、エルゴトロン LX デスクマウント モニターアーム 45-241-026 そのものです。色が黒くてAmazonロゴがあるだけですね。最小荷重の表記が本家3.2kgに対して2.3kgなのは単なる誤植なのか表記上の幅なのかは分かりませんが、cintiq pro 13 inとサンワダイレクトの250gほどのVESA対応タブレットホルダーの合計1.2kg程度の組み合わせでも、ガスシリを最大まで弱く調整すると勝手に浮いてこないので利用の幅が広い良い商品だと思います。エルゴトロン LX モニターアーム 延長用アーム 45-289-026等のエルゴトロンのアクセサリーパーツも問題なく使用できます。が、本家より安いのはともかく、同じくOEMのHPと比べると無駄に高い価格設定なので、HPのものを買った方が良いでしょう。違いはアームの表面加工（Amazonはエルゴトロンと同様つるつる、HPはザラザラ）とロゴの違い位です。2018年3月　追記液タブで使用していましたが、やはり浮き上がりが気になりだしたので6mm厚で125mmx125mmのスチール板を二枚加工して間に挟んで重りとしました。合計で3.3kgで浮き上がり無く使用できています。2019年4月追記1年以上経ちましたが特に問題は出ておりません。液タブが手軽にどかせる環境を実現すると、もう元には戻りたくなくなりますね。ところで、こちらの商品というか、エルゴトロン系のモニターアームって、ボケーとガスシリだと思ってたんですがスプリング式なんですね、知りませんでした。圧縮バネって想像以上に長持ちするのと、イスやホビー用途のサスペンション機構なんかでも、ガスシリンダーって意外とガス抜けしてヘタってしまうのでエルゴトロン系のスプリング式を推します。2020年5月追記現在も問題なく使用できております。最近は自分が購入した時よりも価格も下がってるのでお値ごろですね。HPのOEMは品薄になってしまっているみたいですので、安いエルゴトロン系だとこちら一択でしょうか。ただ本家も結構安くなってきているので悩ましいところです。

※画像参照単純にデュアルディスプレイが欲しいと思考停止で買ってしまいましたが、場所をよく考えないとダメ。自分は壁と向かい合う形で机を置いており、壁に机が触れるようにくっつけていました。ですがディスプレイを綺麗に並べようと思うとどうしてもアームを突き出す必要があるので壁から机を引き離す必要が当然あります。勿論机を手前に持ってくるので部屋が狭くなります。よく考えて購入しましょう。アーム自体はとても丈夫そうでディスプレイの推奨サイズ27インチまでとありますがBenQの24インチとEL2870Uの27.9インチで使用しても重さで下がったりとそんな気配はありません。学習机で利用しているのでクランプ設置の際奥行きが足りないのですがそれでも支えられています。

シングルディスプレイタイプを2つ買って一つのポールで使用したかったのですが、エルゴトロンの方のレビューでも短いポールでの実践例がなかったので可能かどうか不明だったのですが、可能でした。値段が同じなら最初からデュアルディスプレイタイプを買えばいいと思われるかもしれませんが、今後大きなディスプレイ一枚になることを考えるとデュアルタイプだとアームの出る位置がやや不自然になりますし、シングルタイプが2つなら余ったアームを他のモニターに使い回せる利点もあるかと思います。またシングルタイプを購入した後にデュアル環境にしたくなった場合も追加でシングルタイプを購入すれば良いということなので、この辺のことは商品ページに記載してあると親切に思いますね。正式にサポートしていないから記載がないのだとは思いますが。あとこれは個人的にですがデュアルタイプの見た目が好みではなく、一本のポールからアームが複数出ている見た目が好みだったので今回の選択をしましたがモニターの前に座った時の目線の位置からは台座が少し見えるくらいでアーム部分は見えないので、最初からデュアル環境で今後も変える気がないのであれば正式にサポートされているデュアルタイプの購入がおすすめです。ただ一つ注意しなければいけないのが、小さいモニターだと後ろのアーム同士が干渉してしまって隙間なくモニターを並べるのは難しいと思います。自分の環境はBenQのGW2283を使っていますが、21.5インチのスリムベゼルでかなりギリギリなのでこれ以上小さいモニターでデュアル環境を検討中の方はこの事をご留意ください。写真も掲載しておくので、よかったら参考にしてください。

amazonがプライムデーなどの大型セールの際は必ずと行っていいほど割引がかかります。8200円で購入できるので、焦って買わないよう注意してください。使用感はとてもいいです。ASUS PG279Qでの仕様をしていますが、全く落ちてきませんし、自由自在に動かせます。一つだけ文句をつけるならばこの商品に限ったことではないのですが、サイドにスライドできないことが残念に感じました。エルゴトロンのOMEなので本家を買ってもこちらを買ってもいいですが、こちらのほうがとても安いのでおすすめです。

Zu befestigender Monitor: Dell U3415W (34" Ultra-wide, 10.8 kg, vermutlich mit Fuß)Habe dieses Produkt im November 2018 für 90,84 EUR am Amazon Black Friday erworben. Ich muss sagen, dass es eine gute Wahl war! Der Amazon Basics Schwenkarm ist aus meiner Sicht jeden Cent wert.Zur Auswahl stand neben diesem Schwenkarm von Amazon Basics auch noch das Produkt von Ergotron (LX Desk Mount), sowie Fleximounts D7L. Mit diesen möchte ich hier vergleichen.Aus meiner Sicht sind der Amazon Basics Schwenkarm und der Ergotron LX Desk Mount bis auf die Farbgebung identisch. Der Unterschied zum Fleximounts ist aus meiner Sicht nur die etwas höhere Tragkraft des Fleximounts und am oberen Teil des Arms ist bei dem Modell noch eine Kunststoffabdeckung (verschwindet aber ja eh hinter dem Monitor...) Zumal die Preisdifferenz 50 EUR (oder höher) zu dem Zeitpunkt betrug. Alle drei lassen sich entweder a) per Klemme am Tisch montieren oder können b) über ein Bohrloch und eine Schraube befestigt werden.Der Schwenkarm ist sehr einfach zu installieren. Den VESA Mount am Monitor befestigen, das Unterteil am Tisch verschrauben, Schwenkarm-Teile aufeinanderstecken, Kabel ziehen, fertig! Die Kabel vom Monitor (1x USB, 1x HDMI,, 1x DisplayPort) können locker im Arm verstaut werden und werden über Kabelbinder dort fixiert (etwas Spielraum lassen auf Höhe des Gelenks!!!)Vorteile durch den Schwenkarm:* Meine Nackenschmerzen und/oder Kopfschmerzen bei einem langen Tag am Bildschirm sind verschwunden.* Schreibtisch sieht sehr aufgeräumt aus* Sehr flexible und schnelle Anpassung an wechselnde Bedürfnisse ohne irgendetwas verrücken zu müssen* leicht einstellbar (sowohl von der Positionierung des Monitors, als auch die Einstellung des Arms bei der Erst-Montage [Feder, etc.])* wackelt nicht und verstellt sich nicht automatisch* Qualitativ hochwertigIch kann jedem der mit dem Gedanken spielt sich einen Schwenkarm zuzulegen, nur empfehlen diesen hier in die engere Auswahl zu nehmen.Wenn Ihnen diese Rezension bei Ihrer Kaufentscheidung geholfen hat, freue ich mich über einen Klick auf "Nützlich".