LBG Products Rubber Anti-Vibration Isolator Pads,Heavy Duty Blue EVA Pad for Air Conditioner,Compressors,HVAC,Treadmills etc(4'' X 4'' X 7/8")

This made a huge difference for me in the amount of noise generated by my basement heater hung on the basement ceiling. I put the pads in between the heater and the ceiling and it worked great!

Bought vibrating chairs and needed a way to keep vibrations from getting to the floor. These dampeners are great but I modified them with viscoelastic tape and felt padding so the black rubber doesn’t leave streaks on the hardwood floor.

These are very effective but smell horrible. The smell still hasn’t gone and I’ve had them for a few months.

Good solution for my wandering washing machine. Priced right!

Sound absorption for treadmill in apartment on upper floor. Love it.

They came fast but like many people I bought them to go under a treadmill that’s inside but they had a really REALLY bad rubbery smell . I’m on my first day soaking them in some Dawn dishwashing liquid(hey if it cleans up ducks and birds from oil spills maybe it will work). So if the smell goes away after a couple of days I will review again I suggest people try that if you are keeping them because they’re very solid and sturdy probably better for outside use though.UPDATE:Day 3 : after soaking these and some DAWN Dishwashing detergent And cool water plus I added a lot of baking soda I would put like half a small box swish it around for about three days changing the water once a day they are definitely tolerable for the price you might find something else that didn’t smell like a rubber factory. But I put them under the treadmill in a very small second bedroom and you can’t smell them . I may add a Glade plug in but you really can’t smell them under the treadmill they work perfect very solid very thick-just definitely soak them first or keep soaking them until the smell is tolerable and put them out to air. It was recommended if you have carpeting under your treadmill that you definitely want to put something like this because you can damage the belt if it’s too close to your carpeting but you don’t need an extra pad just these.

Needed to quiet down our outdoor AC unit as we were getting an annoying vibrating/droning noise. The minute I put the pads under it the annoyance was gone.Yes it smells like your typical neoprene type rubber that can be offensive when used indoors.

The media could not be loaded. I'm familiar with vibration dampening technology. These worked exactly as I hoped they would. The inner absorbing material works as it should. The outer layer is soft enough to prevent skidding.I purchase the four, 4-inch squares and only used two of the squares. They cut very easily with sharp utility knife.My washer and dryer with the OEM plastic feet, would easily slide on my vinyl floor.Inner layer does the job it should do.Outer layer keeps the units in place.I glued the appliance feet to the dampers with a craft glue. I just put a wedge umder a side, then put a blob of glue on them ...and slid the devices into place (under each appliance foot) with a stick.Then let it set for 24 hours before moving or using the appliance s. I did this so I could move/lift he appliances, and keep the dampeners in center.Do your best to not just make the appliance level, but strive to distribute weight equally.Odor is typical of materials of this kind....just off-gasses. Smells like new tires.