Machine Lubricant Oil Dispensers 120 ml Set of 3

My oil mixture did not work with these bottles. My specialty mix for my business needs is too thin. The bottles leaked bad, wasting the product and they became trash. Not sure how they would hold up for thicker oils.....

These used to be oddly hard to find and I ended up tracking them down a few mos ago by searching for "sewing machine oil bottle". Wanted more and was pleased to find them on Amazon. I use these in the machine shop and try to have a couple next to every machine and in every corner. They're perfect for lathe and mill use.

Nice little dispenser, has a metal tube (not telescoping) with about a 15 degree bend with a cap on the end. You have to remove the cap to dispens, I wanted less oil so I drilled a 1/32 hole in the cap. I use mine for cutting oil.

Perfect little containers for squeezing out lubrication. Bought for my sled when I did a top end and used two stroke oil to lubricate engine components when I put it back together

As these don't cost very much, one cannot expect high quality and these are just barely usable. The bottles have seams and are on the soft side. The heavy spout make them fairly unstable if they are not full of liquid. The metal caps screw poorly onto the spouts. These might be OK if you don't use them very much.

Really great find. Perfect size and love the screw on top. Dont worry about spillage as these are packed and transported from job to job.

These are fine except they let out too much oil. Regular sewing machine oil will just drip-drip out if you tip the bottle. I have another oiler this style that I love that only drips oil if you squeeze it gently. Was hoping these would be the same, but unfortunately not.

Use them in my shop - a lot.