A: Why use a bearingless design 1. Because the bearingless ring has the strongest comprehensive performance: the bearing parts are easily corroded by rainwater. After being corroded, the ring will be completely unusable and the bearing cannot be replaced. The bearingless ring structure is simple and more durable, and the rainwater The degree of corrosion is extremely low, and the bearingless ring has the same rotational performance as the bearing ring after applying the lubricant. 2: The bearingless ring is cheaper to manufacture, and the cost savings will be directly fed back to the buyer, so the bearingless ring is sold at a lower price than the bearing ring. 3: Suitable for all kinds of environments: in the place of residence at the seaside, the humidity in the air is greater, the salt content in the air is higher, the bearing is corroded very fast, and the bearingless ring avoids this situation. B: Which parts have been upgraded by Flag Pole Rings? 1. Rotating parts for upgrade: more precise production and enhanced rotation performance. 2. Rotating ring and flagpole fixing screw upgrade: Replace the finger screw, and use the hexagon socket screw to fix the strength. The product is equipped with an Allen key, which is very convenient to use. 3. Carabiner upgrade: Carabiner is made of 304 steel, and it is thick and very durable. C: Why is it worth buying the flagpole ring kit we sell? 1. Upgrade multiple parts of our products, which will greatly improve the performance of the product, and increase durability and convenience. 2. Our flagpole ring is equipped with a large carabiner made of 304 steel, which avoids the extra cost of replacing parts, which will save a lot of money.
D**C
Works in Wind as Expected
The media could not be loaded. Works wonderfully. At first my flag would not untangling on its own. I figured out I had the brackets to far apart. I readjusted and brought them in closer and has been working perfectly since. These work well on a 1/2” pole. I wrapped black electrical tape underneath each bracket for extra security. I sprayed some D-40 on each rotating part. Great price!
D**T
ZHODR Aluminum Alloy Flag Pole Clip
Wow! This replaces the cheap plastic clips that normally come with wooden and aluminum poles. It's even better than the ones on my heavy duty aluminum pole. This clip is the king, made of heavy metal and will be the only clip you will ever need. Be sure to loose the small hex socket screw a few turns with the enclosed allen wrench before sliding it onto the pole...then just tighten it on. Although the ring that attaches to the flag spins freely and doesn't hang up, I added a bit of silicon spray on it to reduce the friction and wear. The round flag hooks are the size of a medium pad lock...unlike the cheapie flat metal hooks that are hard to use and potentially cut your fingers with its sharp corners. To attach your flag, simply loosen the round nut and easily push down on the round metal clip to attach the flag. Then tighten up the nut to disable the clip. These features are used on expensive BlackRapid camera straps. Worth the money. It comes in a heavy duty gift box and the parts are set in black foam. Classy. A nice gift to your patriotic or homemaker friends.
D**E
Complete Junk
DO NOT PURCHASE THESE!!!! I thought they would work better than my zip-tie loops I made to keep the flag from twisting on our garage pole. They are 100% worse. For the price and the design you would think that they would work great, but the top will not rotate around. Even the slightest breeze causes my flag to wrap, I reverted back to my zip-ties until I can find a better solution.
M**X
No more tangles
This was a great replacement for my existing flag pole clips. My original clips had the bearing on it and the flag would constantly get tangled. This design avoids tangles and I have yet to have to free the flag. It has been very windy theist few days too. I would give it 5 stars if the carabiners were all little stronger. I’d still purchase again for sure though!
J**A
Easy to install-effective
I needed this set of flagpole clips because my flag (which I ordered at 9/11) kept getting wrapped up around the pole. After installing this set, I have had NO problem with twisting-even in high winds! It was well worth the price! I'm so glad I bought it!
D**5
Pretty sturdy
Solved the tangled flag issue , just make sure to install them in the correct direction as per instruction or the smaller ring will get loose .Only downside , I’m not sure how long it will last as it has no bearings at all, it sits aluminum on aluminum, I could see it grinding itself out of existence :-) but that’s probably many years down the road
B**R
Product needs improvement.
The aluminum metal on metal friction is not good for acting as a “bearing”. Once weight or pressure is applied, it will get stuck and not rotate reliably as it should.Lubricant will help some, but it would be best for this business to work on improving their design using different materials like smooth stainless steel or even a durable smooth plastic.Aluminum is lightweight and I prefer metal over plastic anyway, but aluminum is not smooth enough.
N**F
High quality product nicely packaged
I have used my original order of three pairs of these for over a year now and they work great. I just ordered and received two more pairs and they came in similar packaging to the earlier ones, over the top. See my pic. I live in Kansas and we put up with some very windy conditions so I can't fly my flags every day, but on days when the wind is below 15 mph I fly 3 flags at a time. These rotating pole clips are very effective at keeping the flags unfurled. Very high quality and no breaks so far. I spray them occasionally with powdered graphite, which helps them swivel smoothly. Highly recommended.
E**N
perfect
This is the second set work perfect thanks
S**E
Well made product
As described and great quality.
S**S
Great for the price
Easy to use. I inattentive on a piece of conduit instead of buying a whole flag pole assembly.
Trustpilot
4 days ago
3 weeks ago