Bulwark FR mens Flame Resistant 9 Oz Twill Cotton Classic Coverall With Hemmed Sleeves

I bought a pair of these coveralls primarily for use in my shop when I am welding. At 6'2", I ordered 46L just so I would have ample length in the legs to fit over work boots - there is nothing worse than a hot spark that finds it way into your boot while in the middle of a critical weld. The 46L is a bit long in the sleeve and the legs, but for my use, the fit is perfect (even when squatting or sitting there is still ample coverage over ankle).Out of the box, the flame resistant chemical treatment is obvious with a fairly strong smell. That went away with a quick wash in cold water, mild soap, and air dry on a hanger in the shop for a day. I've had them for a couple of weeks now, and wear them for a 2-3 hours daily. I've had several hours each day at the welder or grinder station with continuous hot metal sparks and spray coming in all directions, and the flame resistant properties are exactly as advertised. I see no signs of burn through. The welder puts out an intense amount of UV rays from the arc. Many cheaper (lighter) materials will let enough of the UV through that arc sunburn is common through many materials. With nothing but lightweight long sleeve and long leg underwear, I've not experienced any arc sunburn through the 9 oz material. Shop temperature varies from 50-70 degrees F. At the lower temperatures, these are just the right weight. However, when it warms up in the shop (70-72 F), I feel the heat - these do not breath, so air circulation is minimal (but if they did breath there would likely be UV leakage from the arc - so I tolerate the warmth in favor of UV protection)For the purposes that I use them, these are perfect; I can find nothing to complain about yet. Zippers and snaps appear to be decent materials. Sewing at seams is double thread in some places, single thread in others. I would have preferred double thread seams everywhere for durability in shop wear, but I see nothing to suggest these will fail in normal wear in shop environment.At $60 pair, they are more expensive than many others. BUT - the protection from UV and flying sparks and weld splatter is most important to me, and these Bulwark coveralls are exactly what I wanted and needed. I'll buy another pair soon (these will need a second washing soon and I don't want to be without them for the day or so that will take)

Way too long, but we cut off extra and stuffed into boots. Crotch a bit low, but character has short legs so it worked splendidly for our purpose.Pretty light weight fabrics, which was preferable. Great item.

The sizing is off but other than that they get the job done.

Active duty military and I work on ships where we need fire resistant clothing and these are perfect. They fit great and it feels like I’m cheating some sort of system since these are cozy like pajamas. I love them and will be buying more through my career.

Using these FR overalls for work. The material is not so heavy duty where it feels so heavy on you, they feel really good.I am 5’10 195lb and i normally wear a 34R in jeans(Levi’s). I originally on my first purchase ordered a 38R and assumed since they were 38 they were going to fit big……BIG mistake they where the tightest overalls I’ve ever had to squeeze in, I couldn’t even wear clothes under the overalls. So I went ahead and ordered a 42 and they grit perfect. The picture there I am wearing shirt and jeans under and doesn’t look big on me. I think the size scale on these overalls go by 38, 40, 42, etc. so I would recomend getting 2-3 sizes bigger or your personal preference.

Size up when purchasing. This runs small. Bought an X-Large and it barely fit my husband. If he had a glass of water he’d of busted the seems. 😂 Besides that it is well made.

I’m 6’3” and 200 lbs. I ordered 46 long. They fit perfect over jeans and a t-shirt. Even with a sweatshirt on if it’s a little nippy in the morning. Legs are big enough a guy can slip the big ol’ work boots down the pipes. The sleeves are tight enough not to get you wrapped up in the belt sander. What the fellas really want to know though is how they fit when you’re sittin’ on the ol’ roll around repacking wheel bearings. Lesser coveralls will ride up and put the old jewels in a world of hurt. Not these! A guy did some grinding and welding the other day. Nothing caught fire unlike that time one of my Amazon essential sweat shirts decided I would make a fine tiki torch. By the way, those sweatshirts make for a decent fire starter in case a fella has a need for a quick warming fire out in the bush. Speaking of which, this coverall makes a guy toasty enough he can turn down the heat just a touch in the old shop. That’s alright. Saves a few dollars on the electrons. You know I was thinkin’ a guy might want to get one more set of these coveralls so you always got a clean set. You know, for cleanin’ up proper and goin’ to town.

This product would not last a day in any environment. So thin I can see through it.No way is this CAT 2 fire retardant!They lied!!!I would never again order any product from this company.

This has got to be the best buy this year so far. Great price fantastic quality. I would buy again and again if I needed it

Coveralls fit nice and are comfortable. If you weld or cut with torches the FR rating is marginal. Caught fire while cutting and marbles burn through when welding overhead.

Very durable, run a little small. Usually take a 38 but is tight fit. Will order a 40 next time. Legs are long enough to protect pants. Not very easy to put on as its 100% cotton and stick to your underlayer, but the point it it’s fire proof, will resist grinding spray very well. Worth every pennie.

Great fit. Perfect for Halloween.

good quality, nice and thick