Fluance RT85 Turntable with Ortofon Cartridge, Acrylic Platter, Speed Control, and Vibration Isolation - Walnut

Great turntable for the price, especially given the Ortofon 2M Blue and acrylic platter. It looks really nice and has some heft to it. Setup was easy and it sounds good too. I'm using an Emotiva USP-1 phono preamp.

I bought this to replace an Audio Technica LP-120X USB. That turntable was upgraded with an acrylic platter mat instead of the rubber that came with it. I had also replaced the cartridge with an AT VM540ML/H. This is a definite upgrade from the cartridge that came on that turntable. Because I have that cartridge, I decided to buy the RT85 with the Ortofon 2M Blue cartridge. I think the Nagaoka MP-110 is probably similar to the VM540.The RT85 came quickly and surprisingly was only single boxed. But the contents were very well protected inside. Setup was like most other turntables. This table is smaller than the AT it is replacing but the bamboo veneer gives it a much better appearance. The acrylic platter gets a 10 vs the aluminum platter on the AT. The tonearm, headshell and cueing lever are similar to the AT. However, the tonearm weight has a scale that is almost impossible to read without the assistance of a bright light and maybe even some magnification. The anti skate dial is only slightly easier to read. The AT is much easier to read. Fluance, this needs to be improved. Maybe my eyes failed me when setting the tracking force, but it was off by about 0.2 when I checked it with my scale which was calibrated (1.6g vs 1.8g). Also, I've seen some reviews where people said the speed knob was cheap. It feels fine to me. I do like the on/off knob and start button feature on my AT LP-120 better. But the Fluance is still good. Also, the AT turntable it is replacing has an indentation for storing the 45rpm adapter and place that actually holds a second cartridge. I don't have any 45s, so that doesn't really matter to me, but the cartridge holder is a nice feature on my other turntable.Once it was setup, I grabbed a Pink Floyd album (what else). I played Shine On You Crazy Diamond. It sounded really good and I have to say, I think there may be a little more bass coming from this cartridge setup vs the AT VM540. But I'll need to do some A/B comparisons. Also, a light finger tap on the right side of this turntable is quieter that when tapping the plastic right side of the AT. The same is true when tapping the top of the plinth and much quieter when tapping the left side. Also, the cueing lever is damped much better than the AT. It will just dump the arm onto the record and this one is nice and slow. For reference, the speakers are Q Acoustics 3050 towers and the power comes from a 1990 Denon DRA 1025 (125wpc) which I bought new for $999. I also have a set of Wharfedale Lintons coming later this week and I'm looking so forward to getting them going.So, this is a $500 turntable out of the box. My AT LP-120X with the upgrades (acrylic mat and AT VM540 cartridge/headshell) is now at $650 or maybe more. I can easily change over to the AT VM540 if I want and I don't know of any upgrades I could make to this table. So, it is a better buy. The veneered MDF is prettier and quieter than the black plastic AT LP-120X. The professional reviewers all over the internet and YouTube are correct about this table. I also considered a couple of Dual turntables, Thorens and even a Technics ranging from $599 up to about $1,100. I'm sure the Technics is probably a much better table than this RT85 but Dual is just not the same company it was in the 70s and early 80s. They are no longer made in Germany. I have about 120 vinyl records, maybe a few more and have about 500 CDs. So, I decided that the RT85 is right where I need to be.

So....decided it was time to get my vinyl up and running. Had a Denon dp300 table + Onkyo nr777 receiver + Polk 65t towers. I just wasn't getting the sound I felt like I was expecting so, the chase began. Started with an Ortofon 2m blue cartridge....sounded pretty good but....then bought a Project S2 pre thinking the pre on the Denon probably wasn't that great still.....meh. I even bought directional RCA cables the were...mid high end. Had begun to look at new speakers. The Polks were very highly regarded when I bought them but felt like maybe something better. In the meantime, I bought a handful of remastered old favorite LPs and one evening I noticed that the needle on the Denon table was running across the label before returning. My wife and I had moved a couple years ago and the Denon did not have an arm lock. I took the cartridge head off before moving but, I started to wonder if the tonearm hadn't taken a beating during the move. so....started looking at tables....Project, Music hall etc....etc....One evening I stumbled across the RT85 so I began to look into it. I liked the autostop feature for obvious reasons. The more reviews I read, the more I felt like I could take the chance on a,unknown to me company. Besides, they threw in a Ortofon 2m blue with it.....($300) cartidge. The unit arrived well packed. I am in my sixties so am very experienced on putting together and setting up turntables. Setting this thing up was a breeze...not sure why some folks have such a hard time. (I did need to align the cartridge a little bit but, the instructions come with a protractor so...no issue).Once I got it all leveled and hooked up, I pulled out the remastered Steely Dan "Aja". More stereo systems were sold in the 70s by demoing Aja than any other....blah blah blah. Anyway....as soon as I dropped the needle, there was the sound I was looking for. Clear separation.....full eq with punchy low end without being rumbly (have a sub for that)...midrange was right their. No need for new speakers....the Polks were as advertised. Was glad I bought the Project preamp. Everything these days needs to be "broken in". Ortofon says 40 hours plus on the blue needle....hell, the RCA cables recommended 100+ hours....sounded stellar first time so I expect my set up will just keep getting better.Bottom line....buy this table. For about $500 bucks you get a quality belt drive, auto shutoff (lots of music puts me to sleep), a nice acrylic platter and maybe the best, somewhat, lower priced end cartridge in the biz all wrapped in a gorgeous package. The sound quality is amazing. I am an ardent reader or Sound and Vision as well as Stereophile and guarantee you won't find a better quality turntable, with the features, anywhere close to this price.

I have not had this turntable long but it is a great turntable, especially for the value. Sounds great seems to be built well really dig the acrylic platter and the ortofon M2 blue cartridge. Definitely worth every penny

The media could not be loaded. Excellent build quality, fantastic sound and excellent packaging. I upgraded from a Marantz TT-42, which is plug and play, no tone arm balancing, no counter weight or anti-skate adjustments possible, no alternate cartridge options it just is what it is. It was fine, no issues but wanted better. This Fluance RT-85 was a bit of a struggle for me getting dialed in, but man, so worth it. It sounds awesome. The Ortofon 2M blue is great. The table motor is absolutely silent, speed is dead on, the acrylic platter is great. The bamboo version is so aesthetically pleasing. I am totally happy and have zero regrets. I can’t believe this was only $499 considering how great it sounds and the solid build quality. Five stars all the way!