✨ Light Up Your Life with Style! 🌟
The RGBW LED Strip Light is a versatile 16.4ft lighting solution featuring 300 SMD 5050 LEDs, combining vibrant RGB colors with daylight white. Designed for easy installation with a self-adhesive backing, this flexible strip can be cut to your desired length and is IP65 waterproof, making it perfect for indoor use. Enjoy peace of mind with a 12-month warranty.
M**L
Two ordered - two faulty.
I ordered two of these. Both arrived broken. One clearly is used, as the sticky backing is coming away and the connector was entirely separate from the LED strip. The other simply didn't work when I tried it. So I delved in a little more and found that the black wire (the common one used for positive supply) wasn't actually connected to the LED strip - something you can only see when removing the protective heat shrink wrap from the end.All together very poor quality. Added to this is the non-standard order of the colours. Rather than the normal RGBW this is actually GRBW. This means you get the wrong colours unless you manually change the order of the wires.
A**A
Difficult to get connectors
This is a 10 mm 5 pin LED light, which as far as I can see, is just as good as others on here. The problem I had was finding 10mm 5 pin accessories, there are lots of 4 pin 10mm or 12mm 5 pin, but a limited amount of 5 pin 10mm. And what you can get is usually more expensive. (Plus Amazon's suggestion of what others brought when they bought this, is the wrong size for this light!!) The sticky back is quite good, I had to take my strip on and off quite a few times and it still remains stuck. Although on one roll, the sticky back had been manufactured incorrectly and was missing.You have to be careful when cutting the LED, the clear rubber case is difficult to cut and you can go too far and cut the LED. Because of the lack of accessories, I ended up soldering wires on to turn corners etc... and this was a nightmare to do.
L**H
Lights up my world
Great lights controlled by a WiFi controller sold separately. Comes with pin connector for the end along with moulded starting connection.Easy and obvious where to cut on the strip if required too and so far the adhesive tape has done well.
J**H
Good value
Lights were perfect for the project I was working on.
R**S
Lower wattage than advertised
Measured nearer 10.5W/m as opposed to the 14W/m.. So 25% decrease in Wattage / Expected Brightness.
O**N
good BUT
this is awsome it works BUT you have to buy a power suply sepratly
T**.
WGBR LEDs Good value but...
Pretty much as described. Did not come with any power supply or remote - wasn't in description either so didn't expect it.One end pre-wired well BUT given three star for "easy to install" as the red and green wiring is connected wrong way round, so when connected to RGBW controller the red comes on instead of green and vice versa. Not a major issue as just meant putting red wire into green power output to get green LEDs to light.Haven't used adhesive tape yet as installing on bare wood so expect adhesion wouldn't be too great - just using a standard stapler to hold in place.
N**M
Love the colours
Your browser does not support HTML5 video. Works as it should, connectors were a little difficult to find but the led strips itself had no defective part which is mentioned on another review. I love it and hope the misses will too lol
Trustpilot
3 days ago
1 day ago