LiPo Battery Charger, ICQUANZX RC Battery Charger 1-6S Touch Screen Dual Discharger AC150W DC240W 10A T240 Fast Balance Battery Charger for RC Li-ion Life NiCd NiMH LiHV PB Smart Battery

This is a great charger, with two completely independent circuits with separate UI for each. The best feature is a programmable end voltage, so you can charge to say 80% for short-term storage, then do a 10 minute full charge just before you use the battery again - increasing the battery's lifespan. It auto-detects the cell count (2S, 4S, etc.) so you can re-use programs for batteries with different cell count but similar maximum charge current ratings. The UI is a little confusing but you get used to it.Given that it has a touch screen, it would be nice to have a feature where you enter the mAh and charge C rating of the battery and let it do the math to figure out the current. But it doesn't currently have that (although I see it has a firmware upgrade port, so maybe in the future?).The unit has an integrated power supply, which is great! But there's also a tiny fan that comes on full blast randomly during charging, and boy is it loud! It makes me and my cats jump every time.The original charge cables have T plugs and a bunch of adapters for different connectors. I found them to be extremely tight, requiring use of pliers to separate them. So I ended up replacing them with individual cables with banana plugs to connect directly to the charger.

I gave this charger a 5 because I am not aware of anything better for the size and weight. You get a dual charger that can charge just about any RC battery with the correct adapter. Each channel charges independently (batteries don't have to be the same on both channels). I can chare a 2S Lipo on one channel while charging a NiMH receiver pack on channel 2.I especially like how compact it its because I travel with my RC sometimes by plane and keeping everything compact enough to fit in one suitcase can sometimes be a challenge. With this I get two chargers for the space and weight of own without having to carry and external 12V power supply.

Good price

I ordered the $100 touch screen charger and I recived a $30 charger that doesn’t even work in a normal outlet.

One thing I like about the chargers by HTRC is how they allow you to setup the cut-off voltage for your charge.With this charger you can set the charge to 85% instead of 100%, and as long as you don't drain the battery down below 20%, you can pretty much make your battery last 5 to 10 times as much (depending on your drain and charge speed). Batteries degrade every minute it's sitting at 100%, and it often doesn't make sense for us to store batteries at the storage level of 50% just to spend time charging before use, but topping off form 90%, for example, could work.Yes, other chargers have the "storage" function, which charges your battery to 3.7v, but this mode is for storage only, as the battery is sitting at 50% at that point.I'm re-wiring my cordless tool chargers to hook up to this charger so I will only charge my tool batteries to 80% every time, and stop buying new batteries every year.The charger's fan does get pretty loud, so don't plan to use this in your bedroom. :)

Love it so far only complaint is you can’t monitor both battery’s at the same time but touch screen is fast and really easy to use

used my old chargers forever, got this one, no need for multiple chargers, 2 at a time is very nice, has tons of fetchers