Farasla Upgraded No Drilling Required Mud Flaps for Tesla Model 3 Only

The expansion tabs it came with, you had to use a screwdriver to install it but there is no room unless you remove the tires. Luckily I had push in tabs that I bought. Btw you can’t use the OEM tabs they’re too short due to the add on mud flaps. They look good once installed

Well designed mud flaps & perfect fit for Tesla model 3. Everything you need to install the flaps are included in the box plus 3M double tape & adhesive promoter to help secure front flaps. It is very easy to install & it shouldn’t take more than 30 minutes.One major caveat you will notice when driving on snow covered road is the flaps will accumulate lots snow on them. This is because the side of the flaps facing the tiers are not smooth surfaces. They have ridges & grooves on them which make it easier to collect lots of snow (as you see from the photo) you probably need to remove manually. These should have been flat surfaces (just as mud flaps you see on big trucks) so the snow just slids down the flaps and falls to the ground on it own as you drive the car.

Great product - simple to install and looks great

These mud flaps went on fairly easy. But the clips are utter garbage! The fit is nice and tight. But the clips are utter garbage!Yeah, the first thing you should do is throw these clips away and hope you don't mess up the clips that come with the car, because you'll need to reuse them.I tried one of these clips and it never did tighten up. It seems the Phillips head screw is super soft and will strip out with even the minimal amount of torque. Try it and you'll see what I mean. Not only that, but you don't even have enough room to turn the screw, especially on the rear ones. I had to try using an offset screwdriver. And even that stripped out the head.But I finally got them on using the existing hardware and they do look pretty nice and fit really well, so I can't complain about that. Took about 10-15 minutes per wheel. So yeah, about an hour, I'd say.

I ordered Tesla OEM front mud flaps and didn't care for the look, Ordered these and installed on the rear to compare with OEM on front. I like the addition of tape on the mating edge of the mud flap to ensure dirt/rubbing doesn't do a number on the paint. Nice fit and easy install.

These flaps are a great way to protect your Tesla from rocks and dirt. No drilling required (for context, I have a 2020 Tesla Model 3 SR+), uses existing holes and double sided tape. Once installed, they look like they belong on the car, nothing out of place. But there are a few issues. One, please attempt to use the clips that were already part of your car because the included longer clips are a joke. They are longer to accommodate holding the flaps, but the bulge you shove in is larger than the clips that come out of your Tesla. It makes inserting them difficult. In addition, the plastic of the included clips is so soft, so good luck getting the clips out of you make a mistake. I had to use a pair of snips and chew and pull the clip out, which completely destroyed it. It may be tough to do, but use the OEM clips that came out of the car. They are tight, but if you line it up right and push like hell, they will fit and engage a tight lock. Second, the tape included claimed to be “3M” double sided tape. What’s actually included is cheap Chinese knockoff “3M” tape. It won’t adhere as well as the real deal tape, even with their included adhesion promoter, which is also a bit of a joke. The purpose of the tape really is to create a barrier between the plastic flaps and the paint of your car so one doesn’t scratch the other. It doesn’t really help much with adhering the flap to the car, so don sweat trying to make it stick well. The clips and the bolts on the rear flaps do a fine job and they shouldn’t come off anytime soon. Overall I like the flaps a lot and I suspect they will stay on without issue, but I don’t care for the cheap soft plastic clips included and the cheap knockoff tape. Use the clips that come out of your Tesla and they will work better.

I have had these on my Tesla M3 for about two months and they are doing a great job of keeping mud and dirt off the lower sides of the car, behind the wheels. These guards appear to be made of quality vinyl and fit perfectly to the profile of the Tesla M3 wheel well.The instructions were good, but I watched a couple of Utube videos that helped me immenseIy. I recommend doing this before trying to install. No drilling is required to install. The mud guards are held in place using the existing push clip holes on the wheel well behind each tire. New, longer, push clips are supplied. I started with the rear guards; had a minor alignment problem with the rear passenger side that was resolved with a little extra effort. The lower part of the rear guard is also held in place with a bolt below the rear fender. The upper part of the flap clips onto the wheel well. The manufacturer recommends using double sided tape (provided) to support the upper part of each front guard. I found that the upper part of the front guard clipped on to the wheel well as it did with the rear guard, and did not require use of the double sided tape.It took me ( a 79 year old male) about twenty minutes to install all four flaps.They look great and I'm now a happy camper.

Good price and look great for what they are (molded plastic). My only issue is the tape they provide is junk not 3M quality but it does have 3 M's on the cardboard roll. I had the real thing available so I used it. Easy install overall and for $30 bucks worth it.

Took 40 minutes to fit including getting a bucket of water to clean around the wheel arches. Comes with extra fixings, extra wipes and more double sided tape than you will ever need.Once on, flaps seem solid.Went for black flaps to fit on a white car as I wasn’t sure the white ones would match exactly. Black provides contrast and looks better than a potentially poor colour match. Look discrete and don’t detract from overall looks of car.

Great fit for my Model Y. Easy to install and so far appear to be good quality.

Very quick to install both front and rear mud flaps. Good quality and price.

easy to fit

Can’t praise highly enough about this product , this fits perfectly in Model 3 2021 model.I only fitted the rear mud flaps because Tesla had already fitted the front one.The installation took only 5 minutes for each side. Very easy to install. Highly recommended