Ldeal for wheelchair accessible, accessibility or ADA showers with low or no lip or threshold and can even be installed as a corner water blocker. Perfect quick dam , flood barrier or rubber water shower stopper NOTICE：If you order 3 of certain length, we deliver you the total length of 3 No cutting.You cut it freely. You cut it freely.For example,For example, you order 3 of 1m meter,we deliver 3m to you(NO CUTTING) . Have any problem,contact us at any time Silicone water retaining strip (back side with double-sided tape) installation precautions: Step 1: Wipe off the water and dust on the floor. Step 2: Determine the location of the water retaining strip. Step 3: Remove the double-sided tape and stick the water retaining strip to the ground. Step 4: Firmly press the strip after installation.It can be used in 24 hours. Special reminder: The water retaining strip can be used with glass glue.Apply glue on both sides of the water barrier and apply it evenly. If the two sides and the two ends are fixed by glass glue, it can extend its service life. Notice: Please completely clean the surface and make sure it is dry, remove any existing silicone caulking prior to installation. Please heat the gum by hair dryer for better stickiness before usage. It can be applied to any flat and smooth surface like tile, marble, glass, painted wood, etc. It is suggested to install the strip above 25 Celsius degrees. It will not stick quite good If it' s too cold. Firmly press the strip after installation, and wait about 8-10 hours to use. Special reminder: The water retaining strip can be used with glass glue.Apply glue on both sides of the water barrier and apply it evenly. If the two sides and the two ends are fixed by glass glue, it can extend its service life.
Trustpilot
1 month ago
1 day ago
