Screw Terminal Strip 600V + 400V Pre Insulated Terminal Barrier Strip Red/Black (15A 5P)

UPDATE - This was a four star rating initially. Upped it to five stars after dealing with Cofufu - their customer service was amazing!This is a very decent quality terminal block kit considering the ridiculously low price. However you do get what you pay for and these are not the toughest terminal strip out there. Like another reviewer I had a mounting hole break and crack the casing on one while I was installing them, even though I was trying to be careful.Pros- Very Inexpensive!- Jumper strips are very helpful- Great for compact wiring jobs- 24 month warranty- Excellent customer serviceCons- Not strong - install mounting screws only by hand!- Very small terminals - you will have to use the smallest spade or ring connectors (#6-#8)- Bus (conductor plate) is loose-ish in the casing. Not a significant problem if all your connections are tight and your conductors are secured. But something to be aware of.I contacted the seller about replacement under the 24 month warranty three months after my purchase. My cracked one and the others are already in-service so I cannot return them. I asked Cofufu what refund/replacement options I had. In just a few hours they replied and credited a partial refund to my Amazon account. They refunded more than 1/3 of the purchase price even though only one of the five blocks broke. Fast and generous. And this for simple budget-priced products! I'm impressed enough to up my rating from 4 stars (about the quality and value of the product) to 5 stars for excellent customer service. I'd definitely buy these again for another light-duty application.

Pretty much what you see is what you get. These are surprisingly good quality little barrier strips for the money, with clear plastic covers to prevent shorts from dropped metal pieces. They have four built-in mounting holes, two at each end, but you will probably only use two to secure these small parts.Note that, if you intend to use them with spade or ring crimp terminals, the terminals must be a MAXIMUM width of 1/4" or they will not fit between the barriers. I mention this because standard crimp terminals are usually wider than this dimension. However, the barrier strips come with a small plate mounted under each screw so you really don't need to terminate your wires with crimp terminals, just strip the ends, insert them under the plate and tighten. (No need to hook them around the screw.) I have used up to 14 gauge stranded wire with these with no problem.If you intend to use the included shorting strips, you will have to cut them to your desired size (obviously). This was easily accomplished with a sturdy pair of wire cutters. Note that the cut end will no longer be insulated, so cut them as short as possible to avoid shorts to adjacent strips.Shipping, while not especially fast, was not bad and the parts arrived in good condition. Overall, I'm very happy with this purchase.

This has exceeded expectations. All I wanted was a terminal board. What I got was a terminal board with clamp style connections (no having to wrap wires around the screws), a bus adapter (red and black) for each board, and a plastic press-on cover (numbered) for each board. More than I expected. But be aware there is no mounting hardware. I used #6 wood screws and anchors for my application. Also, this is designed for solid wire. You may have a little difficulty with stranded. But for my application these were much better than I might have expected.

I am building a grow shelf and using this to connect the leads from the striplights together, and I soldered a heavier wire to the connection comb to go to the power supply. 10 1) meter sections of striplights with soldered-on #24 wire merged to one #14 wire per 22 x 44 shelf, 3 shelves per unit.I really like this design - sturdy, convenient, easy to use. I had a pair of these left over from building a 3-phase converter, and it was just the ticket. I am getting more to do the rest of the shelves, and to make sure I have some left over for the next project.

I have a 12v solar project for my shed. Prior to this I was running all the + and - to wirecaps or bundled together. It wasn't clean looking but it worked. Then I heard about these. They make everything look 100% neater, it's easier to add devices to my solar array, and overall it's safe in my opinion especially since it has the covers!I will post picture up but this currently has two exterior led lights along with the interior led lights. I love that these have the metal strip that makes ALL the metal strips be either positive/ground. Saves on wiring and connectors and overall is great!

This is the 2nd time I have purchased these Screw Terminal Strips. We use them on our model train layout to easily connect several lighted accessories to a single transformer/power source. They greatly cut down on the amount of wire needed to accomplish the job. These Screw Terminal Strips are economical and work well.

Maybe slightly overpriced for what you're getting but they work. I am having a hard time finding the right fork terminals to fit into the blocks because they are pretty small. Like #6 post small, I think. Good luck finding a yellow fork terminal that will fit into that block, which is like <8mm wide.

Excellent product. Exactly what I wanted and worked better than expected. I recommend this for anyone in need of this type of product.