1/2" 3-Way (L-Port) NPT Female Brass Ball Valve with Seal Tape

Working well, no leaks, use the pipe thread tape they send. This IS a two way valve as one reviewer said, it takes A or B and sends it to C. I didn’t think about what if I wanted it to not send anything and basically turn everything off. It’s either A to C or B to C. I had to put another shutoff on C for that. Might be able to do without the shut off to C. Works great for what I bought it for and that was to divert A or B to C and it does exactly that.

Well made.It cannot be positioned so water can travel through its long axis. Water must enter through the short arm and divert Left-Right or water from two sources can be turned into a system one at a time.

I think the openings are not NPT. Whatever they are, they are too large. It will take about 6-8 wraps of Teflon tape to keep nylon fittings from leaking. Even then, they will screw all the way in and do so too easily. I had to remove fittings and add more tape. In my case, it is a low-pressure application, so fingers crossed.

The valve is great that’s all I’m going to say.

Do not buy if you need NPT, these are not tapered fittings as they say they are.

threads are over tapped .. there is no taper for fittings to seal against, thread tape, does not help issue, the fittings bottom out in the bore. would work great, if this were an O-RING application.

Valve worked great as a replacement for a plastic valve in our fifth wheel. Less expensive then the plastic replacement by far and more durable. Product doesn’t leak