Dry & Dry [2 LBS] Blue Indicating Silica Gel Beads Desiccants (Industry Standard 3-5 mm) - Reusable Desiccant Beads Silica Beads(Blue to Pink)

I’ve been using the Dry & Dry [2 LBS] Blue Indicating Silica Gel Beads Desiccants (Industry Standard 3-5 mm) as my go-to desiccant for the Bambu AMS, and it’s been a solid addition to my 3D printing setup. Living in a humid area, keeping filament dry is a constant battle, and these reusable silica beads have made it a lot easier to win that fight.The 2-pound jug is a perfect size for my needs—enough to fill multiple desiccant holders in the AMS without feeling like I’m rationing it. The beads are about 3-5 mm, which makes them easy to handle and pour into breathable bags or containers without spilling everywhere. I love the blue-to-pink color change feature; it’s a clear, no-guesswork indicator when they’ve absorbed enough moisture and need a recharge. In the AMS, they start off a vibrant blue, and over a couple of weeks, they gradually shift to pink as they soak up humidity from the filament spools.Performance-wise, they do the job well. Paired with a hygrometer in the AMS, I’ve seen humidity levels drop from the 40-50% range down to a steady 15-20% within a day or two, depending on the weather. That’s been a lifesaver for my PLA and PETG prints—no more stringing or brittle parts due to moisture. The fact that they’re reusable is a huge bonus. When they turn pink, I pop them in the oven at 225°F for about an hour (spread out on a tray), and they’re back to blue and ready to go. I’ve also tried the microwave defrost method for 10 minutes, which works in a pinch, though it’s a bit less consistent.The build quality feels reliable—the beads don’t crumble or turn to dust, even after a few recharge cycles. The jug itself is sturdy with a tight lid, keeping the unused portion fresh until I need it. One small quirk: the color change isn’t always uniform across all the beads, so some stay blue longer than others, but it hasn’t affected their overall effectiveness. Also, they’re not the fastest at absorbing moisture compared to some pricier options, but for the price and reusability, I can’t complain.For anyone running a Bambu AMS, these silica beads are a practical, cost-effective way to keep filament in top shape. They’re simple to use, easy to recharge, and have kept my prints smooth and consistent. Definitely a worthwhile pickup for any 3D printing enthusiast dealing with humidity woes.

Bought these Silica Gel Beads to be used as a 3D Filament role center tube desiccant holder. The holder has 1-2mm slots all around. Shaking the holder after filling with these beads in the holder, nothing fell out, the beads are as advertised and very happy to see that. Will purchase again when needed!If size is a requirement for the desiccant beads being placed into your desiccant container, these will "fit" the need!Beads change to pink over time when moisture is present.

If you have a Bambu Labs AMS you need these. I bought these to put inside my AMS after printing out some desiccant holders and they’re amazing for it. To fill all the holders it only took half the container. They have consistently kept the humidity at around 30% or lower and when they need recharged, you can just microwave or put them in the oven.

Works as intended. Keep my filament nice an dry. When they turn pink I pop them in the microwave and there nice and blue again!!

Used it with my Bambu X1C, so far no complaints.Make sure it cools down before putting the beads back in.

Idk how pink I’d call “pink”… purple is more accurate. I didn’t want the orange ones that turned green bc I thought they’d look gross. But I couldn’t tell these were “wet” at first bc they still seemed blue to me. Now I know that I’m looking for the purple-ish color when it’s time to dry. For anyone using these for 3D printing, my P1S AMS was at a “3” (out of 5) for humidity with the beads in the circular dish.

I loved it, very useful and dries very nicely. It works very well in the microwave to re-dry it too. Would recommend, well worth the money

I use these in my workshop primarily to pull moisture out of small-ish wood turnings when necessary. These really help to speed moisture removal from the wood when necessary. This doesn't always work - but that is more a function of the wood than the beads.I mixed these with a larger amount of less expensive, yet still reusable, non-indicating beads. When these change color, I know it is time to bake the lot. A couple of hours in a low oven and they are ready for use again - nothing complicated about it.Easy to work with, and I have yet to have an issue drying them out for reuse. I have yet to need to throw any away because they are no longer usable - the only ones I throw away are the strays that I end up sweeping off the floor. When I need more, I will certainly get these again.