Description:Material: Aluminum constructionColor:BlackAllows stock to be foldedSuitable for M16 / M4 SR25 Series GBB(AEG).Specify: the use of folding device lower bodyFixed position of the tail tube chopped to 12mm NOTE:Installation may need modifications.Cannot be fired when stock is folded ( GBB Rifl.e.s )
T**M
It works with a lot of modding
First, the plug that goes in the bolt carrier group had to be lapped and have a lot of metal removed to fit, and you need to put the plug in with the flat side down or the plug will sheer off the buffer spring detent pin. Now the other thing that is not clear in the single picture instructions is the fact that you need to remove the allen screw and take out the button parts to install the gun side castle nut. After all of that it goes together easily and works well. One last thing to mention is that this is a clone of a Law Tactical folding stock adapter that starts out at $250
A**R
Disappointing
Says made in USA, it's actually made and shipped from China.Fitment needs modification to work and reliability is lacking.2 out of 20 rounds will have failure to extract. I have yet to experiment with changing buffer and buffer spring to see if reliability improves.Its sturdy and well built but as I said previously, fitment is lacking and requires modification.
G**A
Dont bother it only serves one purpose.... To look cool.
I modified for an actual pistol build. After 20 rounds it didn't want to lock in place without pushing the button and it had significantly loosened up. Also having played around with this a while there is no advantage it just adds a weak point in an otherwise proven system. I was trying to get close to my old AR-180 but the thickness of an AR stock/tube makes this very bulkie folded. I know its a harsh review for an Airsoft piece but even the $300 law is going to do the same thing. It did look cool! but thats it.
V**0
Don't do it
The price is the hook. Not minimally workable. Deceptive marketing. Not what it claims to be.
N**E
Does not fit.
The bolt extender does not fit. I've tried it on several different bolt carriers. It is too big around to fit into the back of the bolt carrier.
M**.
Total rip off
Total rip off. It is a copy of the law tactical even has their name and patent number on it. Don’t buy the piece that goes into the bolt carrier will not fit. Wish I could get my money and time back
L**N
Cost effectiveness
It takes some manipulation and grinding, but it’s works and is much cheaper than the $200+ version.
M**E
Decent product - BUT needs machining work
I purchased this product to fit onto my HK 416 .22LRWhen mounted to the HK, the sliding clasp rubbed on itself and it was very sticky. I had to machine a relief behind it so it could travel freely when mounted.Also, this is the biggest complaint, the ID of the threaded stock mount is tapped for M30 x 1.5It needs to be tapped for 1 3/16" - 16 to accept any AR buffer tubes or pistol braces. I had to buy a $100 tap to chase the M30 threads and change them to 1 3/16" - 16Overall, I regret the purchase a little bit because of all the effort it took to make this work, but I'm still less expensive than the alternative American-made products.After I machined the relief for the clasp to slide freely, and after I re-tapped the threads, it works lol.... but that's a lot of effort.It took a couple weeks to show up from China.Hope this review helps.
Trustpilot
2 days ago
1 day ago