🔥 Cook with Confidence: Elevate Your Culinary Game!
The AMI PARTS W10131825 Oven Temperature Sensor is a high-quality replacement part designed for Whirlpool, Maytag, and KitchenAid ovens. It ensures precise temperature readings, helping to eliminate issues like uneven heating or no heat at all. With a robust 180-day quality assurance guarantee and easy installation, this sensor is the perfect solution for any home chef looking to enhance their cooking experience.
C**L
Works great!
Easy to install!
G**G
Eating pie again after easy install.
I had no problem unplugging the factory probe and installing the new one. Still working after over a months use. The bottom hole of the new probe did not align with the oven wall hole, but I seen it not necessary to drill another hole.
B**R
Easy fix
Easy to install and replace the old broken one. Inexpensive.
A**.
Fixed my F3 E2 error on Whirpool Oven, MUST CALIBRATE
My Whirpool Electric oven started throwing an F3 E2 error and proceeded to burn a batch of muffins. I was dismayed at the thought of buying a new unit but then some Google-Fu led me to try to replace the temperature probe. For my unit it was clearly visible in the top right of the oven against the back oven wall secured by two small phillips head machine screws. Unscrewed the two screws, dropped one, cursed, then pulled gently on the wires to get the harness exposed and just unclipped the old and swapped with the new.I ran the oven for 30 minutes at 350F while keeping a BBQ probe thermometer in the middle rack position location. Temperature was pretty consistently hovering about 15-17 degrees cold/low. For this oven I had to press and hold the BAKE button until it beeped and showed 0 CAL on the display. It allowed me to change the calibration increments by 10 degrees at a time. I went on the lower side and bumped it up by 10 degrees. That brought the actual oven temp right around 345+ range which is close enough for the girls I go out with. You shouldn't expect perfection but anything more than 15 degrees high or low of your set temp should warrant a re-calibration.
E**S
Hole pattern does not work
Hole pattern does not work
C**.
Performed as advertised
Works well and solved the problem. Holes were too far apart to match original but it will mount adequately with only one screw.
T**R
Fits, works, doesn't hold up over time
No problems installing, was pretty close to spot on for temp, but only lasted 6 months and now I'm buying another one.
T**E
Perfect Part
Temperature sensor on my oven died and gave an F3 error. Was able to get this next day, and my oven fixed. I would say the wife was happy, but I'm the one who does all the cooking. My daughter appreciated the fast shipping so she could make brownies.
Trustpilot
3 days ago
1 month ago