LPV-35-12 Power Supply / LED Driver 90-264 VAC Input 35W 3A 12V Output

I got this to use with Bluetooth receiver that will be direct wired. I installed a junction box and for both connection as the DC wire was too short for my need. I connected to the DC side and ran it to where my device was. Overall, worked well and in fact I am buying again to wire upstairs.

Product is fine, it does what it is supposed to, and fits in a 4 gang electrical box.It does not have any instructions or directions for wiring, but red and black side go to your LEDs, brown and blue to the 120v input:INPUT: Brown -> lineBlue -> neutralOUTPUT: Red -> RedBlack -> Black

Used these power supplies to power led backlighting in custom made channel letters and stars on my driveway columns. They work great.

I finally found what I needed, albeit at a slightly higher price than what I hoped for. This was used in a touch-controlled LED light fixture for my garage. Other transformers I tried would soon fail (heat problems, exasperated by summer temps in Arizona). Others had a delay on and off, that played havoc with the capacitance touch control. This one has been working steadily for weeks now, and LEDs respond immediately to the controlled line voltage.

installed unit during new construction. Once hooked up it tripped the breaker on two different circuts. It's now going to live out it's failed life inside my wall and never get used. If you get one test it before installing!

This supply was EXACTLY what I was hoping for. My application was a fluorescent track light, gutted and converted to LED. This supply was smaller than the original ballast, but the bracket from the ballast was borrowed to mount up this supply.The 12VDC output has been very solid, but the real treat: THE LIGHT TURNS ON INSTANTLY!!! Not the usual 1-3 second delay that most supplies have. This makes the light seem like an incandescent, only brighter, more directional and WAY LESS POWER!Just make sure you don't overload the supply.

Was running at 2A, approx 1 hr per day.

I used this with a set of 5 led puck lights under kitchen cabinets. Before installing it I tested and saw the output was 12.05 VDC and steady with no measured ripple. The output did not vary weather one light was hooked up, or all 5 lights. The LED's come on instantly and this power converter is only mildly warm to the touch. I am using this pulling 20 watts of its rated 35 watt rating. I believe in running power supplies between 50-75% of their rated power for long life, I have 20+ years experience with power supplies & UPS systems.