Aeroshell 33 MS Grease Kit - 10cc Syringe (Specifically Sized for Gun Owners and Builders) , Best Gun Grease. MIL-G-21164D

Since I returned the tube because of a crack in the base of the tube, which let the grease out the crack instead of the nozzle, the Manufacture called me and wanted to replace the tube of grease. Not too many manufacture care enough to go this far, so I am giving it a 5 star rating if for no other reason GREAT CustomerCare & Service.Original post:Tube had crack in the end next to nozzle. Grease just seemed to have a lot of Moly in it as it erupted out of the crack on first try to use it. Either poor quality control or some other cause for the crack, however plastic envelope that it came in was not damaged at all. Returned and did not replace or exchange it. I will also be using my Amsoil H.D. Synthetic with moly and the Tetra Grease. Each lubricant has a purpose; as each is used for different application points on different firearms.

I got this grease kit for an ar15 build(for the barrel threads). The grease kit is just what I thought it would be...only better. There's a lot of grease in there! I thought it was going to be a tiny, 1 application type size. I couldn't be more wrong. There's enough grease in there for 20+ builds. I even used the grease to coat my barrel to get my (extremely tight) adjustable gas block on. The syringe works great....just pull back on the plunger when you're done so no more grease comes out. I highly recommend this product to all those looking to get a mil-spec approved barrel thread grease. Great product!

The syringe arrived with the plunger rubber end in the tube diagonally but not attached to the plunder handle. The rubber was swelled so it had to be forced into the syringe. Almost sent it back as defective. Finally assembled the syringe is perfect for tight applications. The grease works well. It only takes a very small amount.

Loved it works great

According to my research, this is the appropriate grease to use for rifle builds on parts such as barrel nuts to prevent binding in order to achieve proper torque readings during assembly. This also acts as an anti-seize compound to allow removal of parts after heating and cooling cycles. The seller packaged the grease in a convenient syringe which allowed for ease of application and they shipped the product quickly.

for those hard to reach places you want to get a little shot of grease in, this is perfect. i have greased the kids wagon wheels, things around the shop, etc. perfect applicator for hard to reach spots

The applicator makes greasing your receiver threads a piece of cake. And unless you really slather it on, there's enough grease in the syringe to put together several ARs. Just retape both ends and save it for later. Would definitely recommend.

This tube will last a LONG time. You could probably build 10 or more guns with this. No need to buy a big container unless you build a LOT of guns.