SilverStone Technology CP11B-300 300mm (11.8 in.) Ultra Thin 6Gb/s Lateral 90-Degree SATA Cable with Custom Low-Profile Connectors, SST-CP11B-300

My motherboard has sata ports that are blocked when you use an extended length gpu, so I needed a cable that came out at this angle to run under the graphics card to the drive. It's expensive for what it is, but the design is what I need for my specific setup, so you be the judge if you can substitute something else. Everything works fine so I can't complain, the two wires feel small from what I'm used to, but it's probably just because they didn't throw another bit of wire shrouding to bind the two wires together along the length rather than any sort of difference in wire gauge.

The fact this thing goes in at a 90 degree angle is exactly what I needed with the Fractal Design Node 202 case I have with the ASUS board I'm using. There is only one way to make it so both SATA ports are usable, and I'll say it like Faith No More: "WHAT? IS? IT? It's it!"

Product arrived fast was exactly what I needed. I've got a micro atx motherboard and a big GPU. My graphics card covers one of my SATA ports, this cable allowed me to actually be able to use the SATA port with no issues.

If you're like me and have tried latching SATA data cables and found them slipping off in your compact build, then maybe these are the end-game. They don't move at all. It's almost too tight and since my drives are stacked, it is difficult to remove the cable from them. In my case, I don't have to remove the cables from the drives. I can dismantle my Sliger Cerberus and set the drives aside and get to the motherboard and remove the cables that way.I do wish I could have found the straight cables, but I'm fine with 90.

Expensive beyond belief (only one is included in the packet - $15 for a SATA cable!), but for small-form-factor builds, this little guy makes cable management a breeze, being unobtrusive and trivial to stow under the motherboard. Truly excellent for my purposes, and unmatched in this regard. Do use tweezers to pull the connector, I do not recommend tugging violently on the cable. Doesn't seem to want to come free so easy, which is good, and if dealt with carefully, may even have less stress on itself due to the fact the connector and cable aren't going to push against anything. CableCreation do make a competitor, having the same low-profile cables (but in a hideous blue), but not bearing the low-profile connector. If a short connector is needed, at the time of writing, this is the only option on the market.

I had issues trying to plug in a PCI video card because it was double-wide and covered two of the SATA ports. I tried plugging the SATA connection in and then mounting the video card but the SATA cable heads were too big. After purchasing and installing these, I can now mount my video card. I haven't had any funny issues with the drives connected with these and I can now use my very expensive video card.If you have reservations about them, DO NOT. THEY WORK!

I have to say that this SATA cable is a life saver. I have a computer that no traditional cable was going to work because the internal components blocked how far the connector end could protrude. Upon helpless research I was about to give up on installing my solid state drive until I stumbled upon this and, trust me, the tiny form factor of this cable made sure that my troubles were answered with certainty because with the lateral profile of the connector end, it was easily able to fit behind the computer components that interrupted all the other SATA cables and I was able to install my SSD. This unique cable is a savior if you cannot fit a normal SATA cable in your PC build because of tight spaces.

These cable are amazing in my case. I’m super limited in space so these came in handy. I used them on my x13SAE-F motherboard. In my case my fan blocks sata ports this helped me still be able to use them.

Purchased the cable to address a space/clean installation of an internal SSD. Due to the physically thin properties of this cable it seemed to good to be true but it was almost like it was made to measure for my requirement. I haven't checked how well this cable meets SATA cabling specs, my own real world tests show transfers no less than with any other premium SATA cable, so I'm well pleased.

Son delgados y permiten un mejor control del cableado dentro del gabinete. Son un poco costosos pero valen la pena. Unico detalle es que cada terminal tiene una etiqueta con el logo Silverstone y que se desprende muy facil pero es mero detalle que se puede pasar por alto.

The tiny custom SATA lead in my Beebox failed due to it being squashed. This lead was the only thing I could find that looked like fitting in the tiny space. Fits and works well

Works well, and I love the way it fits in with my setup.

Excellent Sata cable when you are building a SFF pc and for when you have an obstruction over hanging the SATA ports on the motherboard like a GPU. Just what I needed and fitted in perfectly where a standard SATA cable would not fit.