Direct StoreParts DN112 Replacement Fireplace Blower Kit BLOT BLOTMC for Monessen Hearth Martin Rotom

Easy to install. & works great! A little loud but not hard to get used to! Your mantel will not get hot. I would highly recommend..

Easy to install, even with a few adjustments This was not a direct fit for our unit which we knew before ordering. A longer wire harness would be helpful but with the correct adjustment it was not an issue for us. We would purchase again.

Good value. Works well (though we've used it very little thus far). I used this as an original install for a different brand of fireplace. For me, installation was a complete pain, but that will obviously differ, based on your fireplace. Good value for what you get.

The unit was easy to wire together and install. The fan was a bit on the noisy side and the bearings are NOT BALL BEARINGS but sleeve type, but at a third of the cost of the others... Great value so far under constant use for a few months.

Worked Great! Easy Install.

Very easy to install. There should've been a direction sheet so you know where and how to mount it but compared to others that I priced this thing is a great deal!

It was easy to install and function as described.

Initially, I was pretty happy with this blower but now not so much. Initially the blower worked well and was fairly quiet. When I started the fireplace this season, the fan would not run, just hummed. I bypassed the speed control switch and it ran full speed so I ordered a new direct replacement switch. No it runs but only at 50% plus speed and the motor still hums, LOUD. Initially I thought I would just live with the noise but now I think I'll replace it with something better.

We did not have a blower and installed this to increase efficiency. The install was relatively easy to do, in order to hide the cables I needed to hardwire the fan instead of installing an outlet under the fireplace. The kit only comes with a 3 prong plug therefore I needed to make some small modifications to make it work. The heat sensor works good and the fan is strong enough to blow hot air around a room that is roughly 20x16 and noticeably increases the temperature in living room and kitchen. The only negative is related to the noise. Our fireplace is located adjacent to our TV and when the fan kicks-in it requires us to turn up the volume. Overall it is still well worth the money. Recommended.

As described. Easy installation. Not for my fireplace but made it work very easily and for 1/2 the price.

It was pretty much a plug and play replacement kit. I did not have the thermostat in the fireplace before and it is a great addition. The only thing I had to do was put an older two prong plug to fit my fireplace as it came with a three prong plug. If your fireplace is newer then mine you should have no problem. I would buy this again

The fireplace in my mom’s home did not warm the room up unless you were near it. We inserted it after removing the three metal slats. There was a plug in there luckily so we did not need to hardwire it. Follow the directions and it will work great at a 10th of the cost we were quoted. Two more family friends bought and installed and are quite happy with it. Warms up the room she usually sits in without needing to warm the whole house.

Great communications, fast shipping! Small issues with shipping company which was solved immediately by the seller! A rather easy install; however, suggest longer wires. Made it work but would be easier with longer wires. Wires labelled for easy installation. An absolutely unbelievable price!I'd recommend this seller for sure.