ShopStraw FS250 FlexStraw Aerosol Can Replacement Straws, Neon Green, 50", 2-Count (Тwo Рack, Neon Green)

If you work on cars you often find yourself trying to spray solvent and lubricants on fastenters in tight places that the regular straws just won't reach. You waste solvent and it goes all over the place. These straws actually work great.I used 1 (of two supplied) full length and was able to deliver solvent exactly where I wanted with no overspray or waste.Fit the nozzles perfectly. A little pricey, but you get qwite a bit and most importantly it works just as I hoped it would.If you can bear the price, highly recommended. Have never seen in local stores.

Well, the package says that these straws will fit any aerosol can - they don't. At least not the one I needed it to. I've got four different aerosol products that could possibly use this and it only fits one. The other three use a larger diameter straws, and even those are different sizes. Giving this as I was able to find another product that works for what I need and that uses a small diameter straw like these.

If you use any spray oils, You need this. There are 2 long pieces in this. I cut off and use a 24" piece. I use it on WD40 cans , PB Blaster, Fluid Film. Allows you to hold the end right where you want to lube parts. I also used this to get way up inside my Jeep frame, rocker panels, door bottoms to spray Johnsen's chain lube and fluid film. The straw does pop off the can on occassion...not a prob, just push it back in. For how cheap this is, just get it...You won't regret it.

Now I can spray lube on my car’s door and hood hinges without making a mess. Totally worth the price. The straws are made of exactly the same material as the ones you usually get with a can, just in green color. One thing to consider is when cutting the straw to the desired length, make sure you make a perfect 90° cut using a blade instead of caesars. Otherwise, the straw won’t stay in place snug and will pop out under pressure.

This is a good stray. I used it as an extension on a can of Fluid Film to get it into the deepest corners of the interior of my door. Worked great. I would recommend if you are trying to rust proof your car. This allows you to get into the deep areas where moisture can start to rust the interior sheet metal.

Fantastic idea. It works great to get to all sorts of deep and inaccessible places.One thing that I found that my aerosol can can not always hold steady flow through the long distance. Perhaps the resistance is too much for the can. So instead the spray starts squirting at times. This is not really a functional issue for me, but wanted to mention it, in case it matters to someone else's project.

Had to buy this long straw to get penetrating oil on top bolt/nut of rear shock which is very hard to get at and no ability to get the can with it's normal 6" straw closer than about 12" from the bolt/nut on a 2007 Sequoia.I got both of the severely rusted nuts off without rounding them off or seizing up. This was a DIY project and many others who posted their experience getting rear shocks off Gen1 Sequoia ended up using torches or grinders to cut the shocks out. These straws are kinda pricey but I have bought other tools that I needed only once or twice and I see this product no differently.

I needed to spray rust proofing in my truck doors but the gasket on the bottom of the door to get to the drain holes is hard to pull off and harder to put on. This straw attaches to the spray nozzle of fluid film or waxwool and slips in between the window frame and the window. One can easily finished two doors and the lift gate. Got some overspray on the windows but it wipes off easily.

I've been looking for a way to rustproof my car for ages now. I'm using only "Formula 3000" ("Corrosion Free") because the Canadian army found it better than any other oil, it doesn't drip, and it's safe on rubber (even recommended to extend its life).my problem was reaching all the inner areas of the frame and body, but this thing solved it! Now I have one 50" long tube, one 35", and one 15" (I've cut one to 15" and 35" pieces). Along with the short 3"-4" that comes with the can, that's all I need to reach any surface I want to protect.The only con: with the full 50" attached, you're going to lose a lot of pressure. It will be more like "fast dripping" than actual "spraying", so make sure you use full length only if the surface you want to protect doesn't require "overspray".

The idea here is great. Who hasn't lost those straws that come with some aerosols? The first can I tried this on, I cut off a suitable length which appeared to fit into the nozzle. However, it simply will not stay in the nozzle, resulting in wasted product and a big mess. One day I will get around to trying it on other cans - perhaps they are not all made to a "standard".

Fit all the cans I tried it sticking it in perfectly, if it every started to wear out you could just cut a few mm off the end. I used it to snake into my engine bay to lubricate my steering shaft without soaking my exhaust manifolds with fluid film, but it would also be great for coating the inside of frame rails and lots of other tricky to reach spots.

I bought this so I could spray a rust inhibitor into all the nooks and crannies in my Jeep frame. It fits my spray cans nice and straws. Never have to worry about losing the straws and you can cut them to your desired length. Nice!

Love the way this product is shipped in a full length and you can cut to suit your needs. Fits all my cans. Better than buying a new can each time I loose the straw.

Love these, cut to size, fits all our “lubricant can” nozzles! Excellent!

I use these to clean carbs and so on..... pretty good product... you can cut it and bend it with a lighter to get into hard places!

Easy to find. Keep loosing the red ones. Cut of what you need.

an irreplaceable device. Does the job it's designed for.

Highly recommend these straws.Just perfect for hard to reach places with a spray can.Excellent seller,excellent ship time!!

Parfait

Very good! Excellent Price and Value!

All spray can need to come with this!!